Hyperion Entertainment Message Boards

Hi there back at ya! OK, I'm looking into update 4 and there is a new kernal (and next to it a kernal.debug); the debug, I believe, sends information out the serial device which means (if you were inclined) you could hook up a computer to the serial device/port and look at it; Ive done it in the pas...

Hi there!

There is a "floppy fix" for A1200's and A4000's that is mentioned in the original install (and FAQ) as some systems have issues. I had issues with my IDE DVD drive on install and used an Acard solution.

Dan

Hi again folks! I have those Bus numbers per Calgor's recommendations from my A4000T, CS-ppc with 128MB 60ns RAM, + 16MB motherboard RAM + Radeon 256MB RAM on the Mediator. At the end are the ROM speed and the bus test under OS 4.1 (to be complete). OS 3.9 BUS to RAM Access CHIP: BusSpeedTest 0.19 (...

I know I have the least ability to answer this question, but I going to guess: One, you hop off the CS-PPC board to the Zorro 3 bus. Two, you hop on the Mediator "bridge board." Three, you then get on the PCI bus. Four, you then hop up to the Radeon board and finally get to the RAM. Or: On...

Hi! Sorry, to the best of my German language classes, the product are all German and build on the same hardware with various different shapes , perhaps from different stages of development. I. Bought mine from lpt2usb.net -- based on the http://www-user.tu-chemnitz.de/~heha/bastelecke/Rund%20um%20de...

Hi again! The LPT2USB simply changes the 25-pin Centronics I/O interface to USB; it is bi-directional and works exactly the same as a Centronics parallel interface. Other than conversion from parallel to serial and back, it is transparent to the computer and printer: the USB printer thinks it is con...

OK, this is how my Ami now sits: A4000T (SoftWare Hut) with 400W AT replacement PS (just in case I needed the extra 150W), CS-PPC (SN DC50274, rev. 4 ) 233MHz 604e/ 50MHz 060 + 128M 60ns ram, cybppc.device for SCSI which has Quantum Atlas V 18.2GB (unit 0), White IDE-DVD-R/W 22X (NewEgg) on ACARD SC...

Hi!

The DriveSpeed numbers on the OS 4.1 sii3114ide.device are not good (using an IBM/Hitachi 82 Gb SATA Drive) were 3.2 Mb/s...

Sad

Calgor, here is my mountlist (DosDrivers) and information on SCSI I found: #Boot CF Card - 64MB in a CF-> PCMCIA Adapter DOS/07 Device = cybppc.device Unit = 003 Flags = 0 Surfaces = 2 SectorsPerBlock = 2 BlocksPerTrack = 32 Reserved = 2 LowCyl = 32 HighCyl = 1999 Buffers = 600 BufMemType = 5 MaxTra...

Thanks for that, Calgor! I had seen the 256MB thing in ShowConfig and now I understand it; one buys a 256MB space in the Z3 bus, but only "pays" for 2/3rds of it. Well if I really needed the extra 128MB, I could have AmigaKit upgrade it. Otherwise I don't think changing the SCSI settings w...