Hyperion Entertainment Message Boards

Where can i get 3.5.7 Kernel-module for my installation.
I missing Joystick.ko and affs.ko

Hey You have the same Problem as i on my X1000 under Linux . My X1000 need 5 or more times to setup a correct Debian/mintppc install or boot the installed Debian/mintppc korrect. I Have RadeonHD 5450 and a single 2GB Ram-module. I install with the latest Kernel 3.5.7 (but I can not use a USB-Joystic...

Ists a little creepy Linux on X1000. I must make some Coldboot to geht to the Desktop of mintppc11. On some Coldboots I get a "segmentation fault" Then Reset and try again and voila ist geting good or another Rest is needet. OS4.1.6 boots fine only Linux gets wrong. If boots to the mintppc...

nice i get 1458 fps with glxgears wih my RadeonHD 5450.

btw i have tried supertux 0.7.3 (and 0.8 too) but no joystick are useable.
I use a Keyboard/Mouse/DVI-Switcher (2 Compuer on one Monitor with the same Mounse & Keyboard).
Is that the Problem ?

mintppc11 works also fine. i use the wheezyy-dvd1 for the installation.

Any Tips for mount a amiga ffs on a cf read-write ? I can read for it but not write on.

C U

Update.

I installed Debian Wheezy. And its boots fine. No More SelfKills.
I try mintppc11 on a other HD too.

3h i think. Download the wheezy-cd1 Copy serverl Kernels and amigaboot to my CF and stick it into my X1000 make some CFE Variabels with bootcommandos for cd install boot up and copy the Kernel-modules to /lib/modules restart and need 10 times until i found out i need the " -nousb " Paramet...

I try 5 CF-Cards for holding Linux-Kernels. All will be seen bei the 3.5.7-Kernel and in the Boot-output bevor the Kernel-Panic There are Messages of sd.....Transcend....sda1 or sd.... cf 2 sd.....sda1 sda2 sda3 But my internal sata hd are not show with his 5 Partitions. Can i debug these with a spe...

ty i will try it with beta3. I have used beta4 bevor maybe this was the failure?.

Which Kernel do you use for install and later for booting ? The vmlinux39NH and vmlinux39 Kernel or the new vmlinux-3.5.7 Kernel ?

Do you use a CF inside in the X1000 to boot the Kernel ? or boot it with the FFS-Boot-Partition on the HDD. When i boot with this -> boot -elf -noints -fs=fat cf0:vmlinux-3.5.7 ->Kernel panic cannotn fount rootfs on ..... I think the Kernel-3.5.7 mounts my CF as /dev/sda. with -nousb i can boot. Hm ...