Hyperion Entertainment Message Boards

Finnaly I changed my old 80GB SATA disk with a Kingston V+200 120GB SSD, so lets see how AOS works with such drive (think it has some kind of TRIM/garbage_cleaner built-in support).
And in case it starts to work weird such SSD still can go back to the old 80GB SATA

Hi just "fixed" my SAM460 sound problem with this trick http://amigaworld.net/modules/news/arti ... 6694#89419 and worked great, now sound is clear, no hiss on background.

ScanQuix 5 crash/GR solved by reinstalling from scratch but how do I now what device/unit is using the USB scanner?

TIA

Can you try with another SODIMM (ram module)?
IIRC I had some kind of uboot crash too with my SATA hdd, then I changed from 1GB SODIMM to 2GB ram module and haven't see such uboot_crashes again.

Do I have to take some "special" care to use a SSD on my SAM460ex with AOS4(+Linux)?
Or doesn't matter the 4K blocks on SSD or am I confusing things I've heard about SSD (much faster, but less life,..)?

The one I have here to test is: Kingston SSDnow 200 V+

TIA

well the HP scanjet 5300 USB (sort of) works under AmiCygnix (SAM460ex), it makes the preview image OK, but when I try the "final/real" scan it starts but at the middel of the scannig process it timesout :-P I have another machine (PC) with linux in which works fine :-/ And my "old&qu...

@zappa

Yep, already rtied AmiCygnix, but with my HP Scanjet5300c USB it just start scanning, but aborts/stops (maybe some timeout issue). With ScanQuix I get a crash/GR , can't remember how I configure it with my other/old Scanjet 4p SCSI. ¿:-P

Hi, I'm trying to use HP Scanjet 5300c (USB) with my SAM460, how do I know what device/unit (ex.: USBblah.device/1) my scanner is using? BTW trying to use ScanQuix5 (worked great with my A1-XE) with SAM460 (via USB HP scanjet) and everytime I try to define a new scanner it just crashes/GR. Has anyon...

Hi just bought a SAM460 and installed fine AmigaOS4.1 :-) Just wonder if there is a REBOOT comand a SHUTDOWN could be doable. Lurking in uboot sources found in SAM460.c source:void do_shutdown(void) #define CONFIG_SYS_FPGA_BASE 0xFF000000 { u16 fpga_val; fpga_val = 0x000f; out_be16((void *)CONFIG_SY...

THX will try to get one of those old PCI gfx or the PCI PCIe bridge and test it. Thx again