Hyperion Entertainment Message Boards

You haven't got something setup right. It always detects disk changes, sometimes it can be a bit slow, but no more than 5 seconds. There's probably something interfering the diskchange What dosdriver do you start? These are the DosDrivers and the files which seem of importance to me: Verzeichnis &q...

You haven't got something setup right. It always detects disk changes, sometimes it can be a bit slow, but no more than 5 seconds. Thank you for the tip with c: diskchange, it does work! Great enhancement. I have done the setup as proposed in the manual. Could I have something overseen? Makes it se...

I managed to build in a catweasel 2 controller in X1000. So far it works fine. however, any Diskette changes are not recognized and I have to reboot the X1000. That cannot be normal to reset the machine everytime i make a diskchange. Crossdosfilesystem here is 53.11 ! Is it nessescary to patch that ...

Solution was to rename the vmlinux to vmlinux-3.10.15. Copied all files from the 3.15 folder to root of cf0: an here we go! Thank you for your printenv from that I learned everything! Now it works for 12.04 and I will copy all the other kernels into the root directory of cf0: with their appropriate...

Hi, I am now on again! Solution was to rename the vmlinux to vmlinux-3.10.15. Copied all files from the 3.15 folder to root of cf0: an here we go! Thank you for your printenv from that I learned everything! Now it works for 12.04 and I will copy all the other kernels into the root directory of cf0: ...

sda > Amiga on the orginal HD. sdb > Debian 7.3 on a CF card adapted to the PATA port. sdc > Mint 11 on a second SATA HD. sdd > Mint 11 on the internal CF card CF0. .... Could you please post your printenv output. Probably I can learn from that to do better. With me: sda is the original built in di...

Then, is the name of your kernel vmlinux-3.10.15/vmlinux or is vmlinux the kernel name that is inside a folder? Just guessing here but, if it is vmlinux inside a folder then maybe linux tries to mount the partition to open that folder (???) (or something like that). The kernel name is vmlinux insid...

Could you test it with another CF card? How many partitions has your CF card? With which file system is your partition formatted on your CF card? How much storage capacity has your CF card? It is 4 GB card with only 1 patition of 2 GB formatted as FAT32. With all the last tries with switching power...

Re: Kernel 3.14 Unread postby mechanic » Fri Jul 04, 2014 7:05 pm papaoskar wrote: I found that my linux partition sda9 could not be found because the CF-card with 4GB became sda respectively sda1. Two things, First, could you post your CFE command line for Linux. Second, Linux numbers partitions s...

I have difficulties with booting Kernel 3.14.6. and 3.10.15. My suspicion is a fault in cfe. my version is 2.00.30 as delivered with the hardware on my x1000. A-Eon offers a new? cfe.bin, but without giving version information. I hesitate to flash cfe because things seem to go wrong with me. I have ...