Hyperion Entertainment Message Boards

Hi Christian,

Due to glitches found. I resolved one of them by replacing my ATAPI optical drive SATA cable. Removed the IDE hard drives completely, SATA header speed and I'm sure bus speed increased as well.
Asus R7 250X shows signs of graphical glitch during initial CFE booting. I will be looking ...

Hi Christian,

Kernel 4.1.25 with 6670 - Turks using 12.04.05 LTS. Running great. PA Semi Ethernet only - working great as well. Thank you.

Cheers!

John

OK, "gtk" problem or not, it seems now to be the same one jdupuis John and everyone else is having. Until today attempts to launch FF brought up a Safe Mode window, not Update, border for a few seconds, so I thought it was a different problem. Today I got an empty Update window border that I had to ...

Hi all,

On a more positive note. During the OpensuSe Tumbleweed installation, the WIFI (Prism2) card I bought from AmigaKit was discovered along with PA Semi Ethernet and the Realtec 8139. During boot in Verbose, it was trying to configure Realtec, however, I did not have it connected. The ...

From what I have read 13.2 is at this time built for power5 to power8 processors. 13.1 is for P4/G5. Also I believe
gcc5.3 is used for the 13.2 distro and even if you get it installed there may be problems getting things to work.

It's new, perhaps a P4 product will be along in awhile.


It was ...

Hi John,

I'm sorry I don't know what happened here. Maybe the installation wasn't successfull.

Cheers,

Christian

Christian,

Would the XFX 6670 make a big difference here? I am left to assume that the modified CFE booting statement I have to use just to boot the Kernel may be the issue. No ...

20160521_195039.jpg

My apology for the picture quality. Taken by my Galaxy Rugby Pro.

Point: Testing with the R7 250X proving to be a challenge but would like to see it happen.
Counterpoint: Would be very easy to put the 6670 back in and call it good.

Seems like I'm moving forward by a ...

Hi Christian,

Tumbleweed DVD install.
During GUI Installer, click Create Partition Setup ensure that Partition-based Proposal l is ticked. File System for root partition Ext4. Untick Propose Separate Home Partition then hit OK.
Suse will create:
boot/dev/sdb1 ext4 (400 MB)
root/dev/sdb2 ext4 (931 ...

Hi John,

Many thanks for testing! Well done! It's great that you was able to install it with the DVD. The init problem exists because init is on /dev/sdb2 and you boot from /dev/sdb1 . Unfortunately you can't boot from /dev/sdb2 because it is a btrfs partition. Please use one partition with ext4 ...

opensusepartions.png

Hi Christian!

Tumbleweed DVD install with my R7 250X and using Kernel 4.6. Got the DVD to boot and start GUI installation!! :) Took a little tweaking. Will not boot up after install fro HD - Kernel panic "No working init found". Here's how I got the DVD Installation to work ...