Fienix - New PowerPC Distro

AmigaOne X5000 platform specific issues related to Linux only.

Re: Fienix - New PowerPC Distro

Postby Freemilk » Wed Jul 03, 2019 12:07 am

Hi Peeps, I really like the Fienix, its quite nice.
a few questions,, on the X5000 when I enter the commands separated by the ; , to make the boot linux button work, when I hit enter it boots so how do it do saveenv, I tried adding it to the end of ;saveenv. but that causes a kernel panic, lol

Also Video card acceleration, what to I need?
I have the 250x in it, do I need a newer RX or an older card. thanks

keep up the awesome work.
X5000 - A1222
Freemilk
 
Posts: 2
Joined: Wed Aug 16, 2017 12:58 am

Re: Fienix - New PowerPC Distro

Postby xeno74 » Wed Jul 03, 2019 5:28 am

Freemilk wrote:Hi Peeps, I really like the Fienix, its quite nice.
a few questions,, on the X5000 when I enter the commands separated by the ; , to make the boot linux button work, when I hit enter it boots so how do it do saveenv, I tried adding it to the end of ;saveenv. but that causes a kernel panic, lol

Also Video card acceleration, what to I need?
I have the 250x in it, do I need a newer RX or an older card. thanks

keep up the awesome work.


Hi Freemilk,

Do you use the correct root boot argument? Please post a screenshot of the kernel panic. Unfortunately you can’t use hardware 3D acceleration with your graphics card. You need a Radeon HD 6xxx or lower.

Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
 
Posts: 5379
Joined: Fri Mar 23, 2012 8:58 am

Re: Fienix - New PowerPC Distro

Postby nbache » Wed Jul 03, 2019 11:53 am

Freemilk wrote:on the X5000 when I enter the commands separated by the ; , to make the boot linux button work, when I hit enter it boots so how do it do saveenv
It sounds a little like you have misunderstood something about UBoot (if I'm not misreading your explanation).

First, you need to be in the UBoot command line.

Then you enter:

Code: Select all
setenv linuxboot="..."


- where the ... is the semicolon-separated sequence of commands to boot your distro (not including saveenv!).

After that, in the next command prompt, you enter saveenv, i.e. what you save is the definition of the linuxboot variable.

The next time you boot and get to the menu, using the Boot Linux button should execute the commands and boot Linux.

Best regards,

Niels
User avatar
nbache
Beta Tester
Beta Tester
 
Posts: 1396
Joined: Mon Dec 20, 2010 8:25 pm
Location: Copenhagen, Denmark

Re: Fienix - New PowerPC Distro

Postby Freemilk » Thu Jul 04, 2019 3:52 am

Awesome, I guess I was just tired and didn't make the connection there.
here is the command in case someone else needs it

SATA 0 is my Amiga OS 4.1 SSD

SATA 1 is my Fienix SSD

setenv linuxboot ="sata init;setenv bootargs root=/dev/sdb2 rootdelay=5;fatload sata 1:1 1000000 uImage-4.20;fatload sata 1:1 1c00000 cyrus_p5020_eth_poweroff.dtb;bootm 1000000 - 1c00000"

saveenv


Working now thank you, I am trying various video cards from my pile.

fun fun.

Keith
X5000 - A1222
Freemilk
 
Posts: 2
Joined: Wed Aug 16, 2017 12:58 am

Re: Fienix - New PowerPC Distro

Postby xeno74 » Thu Jul 04, 2019 10:02 am

Freemilk wrote:Awesome, I guess I was just tired and didn't make the connection there.
here is the command in case someone else needs it

SATA 0 is my Amiga OS 4.1 SSD

SATA 1 is my Fienix SSD

setenv linuxboot ="sata init;setenv bootargs root=/dev/sdb2 rootdelay=5;fatload sata 1:1 1000000 uImage-4.20;fatload sata 1:1 1c00000 cyrus_p5020_eth_poweroff.dtb;bootm 1000000 - 1c00000"

saveenv


Working now thank you, I am trying various video cards from my pile.

fun fun.

Keith


Hi Keith,

Fantastic! Well done! :-)

BTW, I created instructions for setting up the button "Start Linux" last year.

Image

Link: Set up the button "Start Linux"

Did you install Fienix on a USB stick?

Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
 
Posts: 5379
Joined: Fri Mar 23, 2012 8:58 am

Re: Fienix - New PowerPC Distro

Postby sundown » Thu Jul 04, 2019 10:53 pm

caseycullen wrote:Fienix uses LightDM; the answer is documented in https://wiki.debian.org/LightDM
-Casey
sundown wrote:I have Fienix installed on an X1000, but I don't think that matters. Is there any way to eliminate the login requester? I have a ubunty mate install that doesn't require a login or Admin pw, I want the same with Fienix.

Thanks for the help, changing '#autologin-user=' to autologin-user=fienix did the trick.
I was looking for an IRC client, but couldn't find one to install, did I miss it, if not, any chance to add one?
X1000 - Antec Solo case, 4GB DDR2 mem, XFX R9 270 gfx card, Plextor DVD, 2 Samsung 1TB F3 HDD, RTL-8139 network card, Cooler Master Silent Pro 600W PSU
User avatar
sundown
Beta Tester
Beta Tester
 
Posts: 464
Joined: Mon Dec 20, 2010 11:38 pm
Location: California, USA

Re: Fienix - New PowerPC Distro

Postby mechanic » Fri Jul 05, 2019 3:58 pm

You can change the root password by opening a terminal and then entering;
su (enter)

passwd root (enter)

Just follow the directions. When finished enter 'exit' and you're done.
A-Eon A1X1000 ATI HD6850, Creative SB1570 PCIe, RTL8139 net PCI.
User avatar
mechanic
 
Posts: 510
Joined: Sat Jun 25, 2011 10:22 pm

Re: Fienix - New PowerPC Distro

Postby sundown » Sat Jul 06, 2019 9:01 pm

mechanic wrote:You can change the root password by opening a terminal and then entering;
su (enter)

passwd root (enter)

Just follow the directions. When finished enter 'exit' and you're done.

Thanks, I did change the root pw to an easy to remember 3 letter pw.
X1000 - Antec Solo case, 4GB DDR2 mem, XFX R9 270 gfx card, Plextor DVD, 2 Samsung 1TB F3 HDD, RTL-8139 network card, Cooler Master Silent Pro 600W PSU
User avatar
sundown
Beta Tester
Beta Tester
 
Posts: 464
Joined: Mon Dec 20, 2010 11:38 pm
Location: California, USA

Re: Fienix - New PowerPC Distro

Postby caseycullen » Tue Jul 09, 2019 4:07 pm

Pidgin has IRC connectivity. If there is a specific client you'd like to use let me know.
-Casey

sundown wrote:I was looking for an IRC client, but couldn't find one to install, did I miss it, if not, any chance to add one?
caseycullen
 
Posts: 292
Joined: Sat Dec 17, 2016 8:12 am
Location: Madison, WI USA

Re: Fienix - New PowerPC Distro

Postby caseycullen » Thu Jul 11, 2019 6:55 am

I just released a bunch of updates for Fienix. Most are fairly minor. Let me know if there are any issues.
-Casey
caseycullen
 
Posts: 292
Joined: Sat Dec 17, 2016 8:12 am
Location: Madison, WI USA

PreviousNext

Return to Platform: AmigaOne X5000 - Linux Only

Who is online

Users browsing this forum: No registered users and 0 guests