Christian
RC4 works fine, boots to Firepro and Logitech mouse works. -:)
ace
Kernel 5.2
Re: Kernel 5.2
Hi Ace,acefnq wrote:Christian
RC4 works fine, boots to Firepro and Logitech mouse works. -:)
ace
Many thanks for testing the RC4. Good to know, that your mouse and Firepro work with the RC4. Could you please post your result with your mouse in the bug report thread?
Could you please post your xorg log file with the uImage-drm10 with the following modified xorg.conf?Michel wrote: (In reply to Allan Cairns from comment #47)
> My Amigone x5000 would only boot to a black screen. No ability to input.
Please attach the corresponding Xorg log file. If you can't log into the system remotely, it should be available as Xorg.0.log.old after rebooting.
Code: Select all
Section "Device"
Identifier "ATI RV620 [FirePro 2260]"
BusID "PCI:5@4096:0:0"
EndSection
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.2
Christian
have posted the outcomes on the bug site, however in relation to the log I cannot get it because:
1. Using the example xorg.conf and uImage-drm10 I cannot access the xserver at all (noting the log will be saved)
2. My subsequent reboot also fails due to the xorg.conf still being in the system. This time I can access shell screemns and remove the xorg.conf but will require another reboot.
3. The old log now reflects the second reboot as detailed above.
ace
have posted the outcomes on the bug site, however in relation to the log I cannot get it because:
1. Using the example xorg.conf and uImage-drm10 I cannot access the xserver at all (noting the log will be saved)
2. My subsequent reboot also fails due to the xorg.conf still being in the system. This time I can access shell screemns and remove the xorg.conf but will require another reboot.
3. The old log now reflects the second reboot as detailed above.
ace
Re: Kernel 5.2
Hi Ace,acefnq wrote:Christian
have posted the outcomes on the bug site, however in relation to the log I cannot get it because:
1. Using the example xorg.conf and uImage-drm10 I cannot access the xserver at all (noting the log will be saved)
2. My subsequent reboot also fails due to the xorg.conf still being in the system. This time I can access shell screemns and remove the xorg.conf but will require another reboot.
3. The old log now reflects the second reboot as detailed above.
ace
Many thanks for testing!
![Smile :-)](./images/smilies/icon_e_smile.gif)
Could you please also post your results in the bug report thread?
Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.2
Hi All,
I released the RC5 of kernel 5.2 for testing today.
New:
Download: linux-image-5.2-rc5_X1000_X5000.tar.gz
![Image](https://i.pinimg.com/564x/19/ae/45/19ae4562d9b6fadba11d798b430921a5.jpg)
@SailorMH
Please test it with your CF cards.
@Ace
Please test it with your two installed graphics cards and with your Logitech wireless USB mouse.
Thanks,
Christian
I released the RC5 of kernel 5.2 for testing today.
New:
- The Logitech dj fix is included in the Linux kernel source code so we don't need the 0001-HID-logitech-dj-Fix-064d-c52f-receiver-support patch anymore. Bug report: Bug 203619 - Logitech Wireless USB Mouse Not Working PPC
- PowerPC fixes 5.2-4
- Linux 5.2-rc5 Released As The End Of The Cycle Is A Few Weeks Away -- phoronix.com
- Torvalds' 5.2-rc5 announcement
- Linux Git log
- Phoronix articles, reviews and news stories covering Linux 5.2
- X1000: pcmcia-v2 patch for solving the issues with new CF cards connected to the onboard CompactFlash Card Slot
- X5000 and X1000: vgaarb patch for solving the issue with two graphics cards in an AmigaOne. Link to the bug report: Bug 109345 - drm-next-2018-12-14 -Linux PPC
- X1000: Enabled the kernel config options CONFIG_PATA_PCMCIA, CONFIG_PCMCIA, and CONFIG_ELECTRA_CF for the pcmcia-v2 patch
- X1000: compressed kernel (zImage) and uncompressed kernel (vmlinux)
Download: linux-image-5.2-rc5_X1000_X5000.tar.gz
![Image](https://i.pinimg.com/564x/19/ae/45/19ae4562d9b6fadba11d798b430921a5.jpg)
@SailorMH
Please test it with your CF cards.
@Ace
Please test it with your two installed graphics cards and with your Logitech wireless USB mouse.
Thanks,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.2
Kernel 5.2 RC5 is all fine on the AmigaOne X5000
![Image](http://www.skateman.nl/wp-content/uploads/2019/06/Screenshot-at-2019-06-18-203922.jpg)
Big picture http://www.skateman.nl/wp-content/uploa ... 203922.png
Keep up the good work Christian!
![Image](http://www.skateman.nl/wp-content/uploads/2019/06/Screenshot-at-2019-06-18-203922.jpg)
Big picture http://www.skateman.nl/wp-content/uploa ... 203922.png
Keep up the good work Christian!
AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / Radeon X1950 / M-Audio 5.1 -> AmigaOS / Linux
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Re: Kernel 5.2
Hi Skateman,Skateman wrote:Kernel 5.2 RC5 is all fine on the AmigaOne X5000
Keep up the good work Christian!
Thanks a lot for testing the RC5 and many thanks for the screenshot!
![Smile :-)](./images/smilies/icon_e_smile.gif)
Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.2
Hi All,
I released the RC6 of kernel 5.2 for testing today.
New:
Screenshot of a Samba AD-DC with kernel 5.2-rc6 and with Windows connected via VNC for using the RSAT tools (X5000):
![Image](https://i.pinimg.com/564x/2e/87/ef/2e87efa3bf5804fdd4781f2c7c52685a.jpg)
@SailorMH
Please test it with your CF cards.
@Ace
Please test it with your two installed graphics cards and with your Logitech wireless USB mouse.
Thanks,
Christian
I released the RC6 of kernel 5.2 for testing today.
New:
- X1000: pcmcia-v3 patch for solving the issues with new CF cards connected to the onboard CompactFlash Card Slot
- PowerPC fixes 5.2-5
- Linux 5.2-rc6 Released With Steam Networking Fix - The Biggest Post-RC1 Release -- phoronix.com
- Torvalds' 5.2-rc6 announcement
- Linux Git log
- Phoronix articles, reviews and news stories covering Linux 5.2
- X5000 and X1000: vgaarb patch for solving the issue with two graphics cards in an AmigaOne. Link to the bug report: Bug 109345 - drm-next-2018-12-14 -Linux PPC
- X1000: Enabled the kernel config options CONFIG_PATA_PCMCIA, CONFIG_PCMCIA, and CONFIG_ELECTRA_CF for the pcmcia-v3 patch
- X1000: compressed kernel (zImage) and uncompressed kernel (vmlinux)
Screenshot of a Samba AD-DC with kernel 5.2-rc6 and with Windows connected via VNC for using the RSAT tools (X5000):
![Image](https://i.pinimg.com/564x/2e/87/ef/2e87efa3bf5804fdd4781f2c7c52685a.jpg)
@SailorMH
Please test it with your CF cards.
@Ace
Please test it with your two installed graphics cards and with your Logitech wireless USB mouse.
Thanks,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.2
Hi Allan,acefnq wrote:Christian
have posted the outcomes on the bug site, however in relation to the log I cannot get it because:
1. Using the example xorg.conf and uImage-drm10 I cannot access the xserver at all (noting the log will be saved)
2. My subsequent reboot also fails due to the xorg.conf still being in the system. This time I can access shell screemns and remove the xorg.conf but will require another reboot.
3. The old log now reflects the second reboot as detailed above.
ace
We still have to use the vgaarb patch. Could you please update the bug report with your results? Maybe Michel has another solution.
Link: Bug 109345 - drm-next-2018-12-14 -Linux PPC
Thanks,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.2
Christian
Sorry but I can't get any logs. Once it fails I have to reboot and remove thexorg.conf which in turn requires another reboot thus overwriting the log file we wish to access. RC6 boots fine to Firepro with logitech mouse working.
ace
Sorry but I can't get any logs. Once it fails I have to reboot and remove thexorg.conf which in turn requires another reboot thus overwriting the log file we wish to access. RC6 boots fine to Firepro with logitech mouse working.
ace