caseycullen wrote:Arctic Fox has been updated to version 27.9.16 in the Fienix repository. Please test it.
-Casey
Fienix - New PowerPC Distro
Re: Fienix - New PowerPC Distro
FYI:
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Fienix - New PowerPC Distro
Hixeno74 wrote:FYI:
caseycullen wrote:Arctic Fox has been updated to version 27.9.16 in the Fienix repository. Please test it.
-Casey
Installing gimp 2.8 and Arctic Fox
Very nice A lot of thanks for Gimp
Musa
AmigaX1000
Re: Fienix - New PowerPC Distro
Hi All,
I received my Fienix USB stick from AOTL today!
Cheers,
Christian
I received my Fienix USB stick from AOTL today!
I had the same issue on my X5000 and X1000. I disabled the "Dummy" connection but it didn't solve the issue. I was able to solve this issue with /sbin/dhclient <network device>. I would recommend to use ip a or /sbin/ifconfig -a to figure out the correct network device. I wasn't able to boot a kernel from the vfat partiton of the Fienix USB stick with the X1000. I copied the kernel 4.20 to the vfat partition again and after that the kernel booted without any problems. I was able to load the kernel 4.20 and the dtb file after the command usb reset from the Fienix USB stick with my X5000.caseycullen wrote:Please check Control Center > Network Settings. If a "Dummy" connection is listed, click on it, then click the Properties button, and disable the connection.
-Casey
Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Fienix - New PowerPC Distro
Unfortunately to set up the network device with the dhclient is only a temporary solution. You have to set up the network device again after a restart. I figured out, where the problem is today. The dummy interface is configured in the file /etc/network/interfaces. I removed the following lines in this file:xeno74 wrote: I had the same issue on my X5000 and X1000. I disabled the "Dummy" connection but it didn't solve the issue. I was able to solve this issue with /sbin/dhclient <network device>. I would recommend to use ip a or /sbin/ifconfig -a to figure out the correct network device.
Code: Select all
iface dummy0 inet dhcp
auto dummy0
Code: Select all
# X5000
iface enP4096p4s4 inet dhcp
auto enP4096p4s4
# X1000
iface enp0s20f3 inet dhcp
auto enp0s20f3
BTW, I boot the Fienix USB stick with the following commands:
X5000:
Code: Select all
X5000> setenv bootargs root=/dev/sdb2 rootdelay=5
Code: Select all
X5000> usb reset
Code: Select all
X5000> load usb 0:1 1000000 uImage-4.20
Code: Select all
X5000> load usb 0:1 2000000 cyrus_p5020_eth_poweroff.dtb
Code: Select all
X5000> bootm 1000000 - 2000000
Code: Select all
CFE> setenv bootargs "root=/dev/sdd2 rootdelay=5"
Code: Select all
CFE> boot -elf -noints -fatfs -z usbdisk0:zImage-4.20
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Fienix - New PowerPC Distro
Please copy the files from the following package as root to the directory /usr/lib/powerpc-linux-gnu.Tijatjj wrote:Using fienix the vlc media player wont play dvds
Download: vlc_addon_dvd.tar.gz
Playing a DVD on Fienix PowerPC:
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Fienix - New PowerPC Distro
Hi Musa,musa wrote:Hi Christian
I testet kernel5.1-rc7
Many thanks for testing the RC7!
Have a nice week!
Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Fienix - New PowerPC Distro
Sad to say I've followed all the changes in both this thread & the x5000 thread & the network just isn't working for me. Both my 12.04 & 16.04 live DVDs boot with working network with my 8169 card. what I did was make a single partition & then dd'ed the Fienix stick contents to it, "sudo dd if=/dev/sde2 of=/dev/sdb". I have a feeling that doesn't make for a normal Linux drive. Can you guys tell me how a simple linux drive should be formatted? I've looked on the internet, but maybe just 'root', 'home' & 'swap' ?
All my DVD & HD linux attempts have different issues on this x1000, could be that linux was never mean't to be, not a major problem, just bugs me.
All my DVD & HD linux attempts have different issues on this x1000, could be that linux was never mean't to be, not a major problem, just bugs me.
X1000 - Antec Solo case, 4GB DDR2 mem, XFX R9 270 gfx card, Plextor DVD, 2 Samsung 1TB F3 HDD, RTL-8139 network card, Cooler Master Silent Pro 600W PSU
Re: Fienix - New PowerPC Distro
Did you modify the file /etc/network/interfaces? I modified it and I don’t have any problems with the network on my X1000 and X5000.sundown wrote:Sad to say I've followed all the changes in both this thread & the x5000 thread & the network just isn't working for me.
— Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Fienix - New PowerPC Distro
I did, dummy0 still shows up, but enp6s6 (8169) shows as "up" in the network icon prefs & in Ifconfig -a. On board network (enp0s20f3) doesn't get me going either. I notice the time settings doesn't stick as well, just seems like the install is wrong. I am using a wired network switch to connect all my network h/w connections, hmm, something I'll bypass tomorrow & go direct to see if thats a problem. But I would like to do a re-install the correct way.xeno74 wrote:Did you modify the file /etc/network/interfaces? I modified it and I don’t have any problems with the network on my X1000 and X5000.sundown wrote:Sad to say I've followed all the changes in both this thread & the x5000 thread & the network just isn't working for me.
— Christian