I just tried to begin installation of Ubuntu (with initrd.gz) with vmlinux39 kernel but I can't see the installation panels
with HD6670 and/or R9200.
=> Failed
Linux kernel 3.5.7 and HD6670
Re: Linux kernel 3.5.7 and HD6670
http://apps.amistore.net/zTools
X1000 - AmigaOS 4.1.6 / 4.1 FE
X1000 - AmigaOS 4.1.6 / 4.1 FE
- trevordick
- A-Eon Technology
- Posts: 1385
- Joined: Mon Dec 20, 2010 1:28 pm
Re: Linux kernel 3.5.7 and HD6670
I presume you mean the vmlinux39pw-1.2? If so this will not work with Radeon HD series 6 cards. You need to use the latest kernel vmlinuz-3.5.7 with Series 5 & 6 cardszzd10h wrote:I just tried to begin installation of Ubuntu (with initrd.gz) with vmlinux39 kernel but I can't see the installation panels
with HD6670 and/or R9200.
=> Failed
Note: I am continuing to investigate the issue.
Trevor
I'm just Breezin'
Re: Linux kernel 3.5.7 and HD6670
Thank,
Yes it was it.
I wanted to try another kernel, because I used the vmlinux357 the first time and hade the "no input" problem.
Hoping that you will find the problem
Yes it was it.
I wanted to try another kernel, because I used the vmlinux357 the first time and hade the "no input" problem.
Hoping that you will find the problem
http://apps.amistore.net/zTools
X1000 - AmigaOS 4.1.6 / 4.1 FE
X1000 - AmigaOS 4.1.6 / 4.1 FE
Re: Linux kernel 3.5.7 and HD6670
Hello all,
I'v posted a question on MintPPC thread to know if it's possible to inhibit the use of a GFX card at startup (to deactivate the use of my Radeon 9250).
Hoping...
http://www.mintppc.org/forums/viewtopic.php?f=15&t=1202
And merry christmas
I'v posted a question on MintPPC thread to know if it's possible to inhibit the use of a GFX card at startup (to deactivate the use of my Radeon 9250).
Hoping...
http://www.mintppc.org/forums/viewtopic.php?f=15&t=1202
And merry christmas
http://apps.amistore.net/zTools
X1000 - AmigaOS 4.1.6 / 4.1 FE
X1000 - AmigaOS 4.1.6 / 4.1 FE
Re: Linux kernel 3.5.7 and HD6670
Great !
Thanks to the advices of rkmugen on MintPPC forum,
I have the Radeon accelerated drivers working with the 2 Radeon cards on my X1000 (by inhibiting the old Radeon 9250 card).
http://zzd10h.amiga-ng.org/Divers/Linux_DualRadeon.png
Now I don't have to unplug my 9250 when I want to play to SuperTuxKart on Linux
more info on
http://www.mintppc.org/forums/viewtopic.php?f=15&t=1202
You just have to :
1) issue a "lspci" command to show where is physically located your RadeonHD card
2) create a /etc/X11/xorg.conf.d/10-monitor.conf, mine looks like this
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
Identifier "Device0"
Driver "radeon"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080_75.00"
EndSubSection
EndSection
3) And voila !
Thank again rkmugen
Thanks to the advices of rkmugen on MintPPC forum,
I have the Radeon accelerated drivers working with the 2 Radeon cards on my X1000 (by inhibiting the old Radeon 9250 card).
http://zzd10h.amiga-ng.org/Divers/Linux_DualRadeon.png
Now I don't have to unplug my 9250 when I want to play to SuperTuxKart on Linux
more info on
http://www.mintppc.org/forums/viewtopic.php?f=15&t=1202
You just have to :
1) issue a "lspci" command to show where is physically located your RadeonHD card
2) create a /etc/X11/xorg.conf.d/10-monitor.conf, mine looks like this
Section "Monitor"
Identifier "Monitor0"
EndSection
Section "Device"
Identifier "Device0"
Driver "radeon"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080_75.00"
EndSubSection
EndSection
3) And voila !
Thank again rkmugen
http://apps.amistore.net/zTools
X1000 - AmigaOS 4.1.6 / 4.1 FE
X1000 - AmigaOS 4.1.6 / 4.1 FE
Re: Linux kernel 3.5.7 and HD6670
Good work! I'll see if I can do the same here, following your lead, zz10dh.
LATER EDIT: It works! I'm using your exact text, and I'm getting 1070-1090fps on glxgears now. Have installed Blender 2.63 under MintPPC, and the interface is downright snappy now. Good work.
LATER EDIT: It works! I'm using your exact text, and I'm getting 1070-1090fps on glxgears now. Have installed Blender 2.63 under MintPPC, and the interface is downright snappy now. Good work.
Re: Linux kernel 3.5.7 and HD6670
nice i get 1458 fps with glxgears wih my RadeonHD 5450.
btw i have tried supertux 0.7.3 (and 0.8 too) but no joystick are useable.
I use a Keyboard/Mouse/DVI-Switcher (2 Compuer on one Monitor with the same Mounse & Keyboard).
Is that the Problem ?
btw i have tried supertux 0.7.3 (and 0.8 too) but no joystick are useable.
I use a Keyboard/Mouse/DVI-Switcher (2 Compuer on one Monitor with the same Mounse & Keyboard).
Is that the Problem ?
X1000 RadeonHD5450 4GB (2x2GB) DDR2-PC2-8500 Kingston HyperX 5-5-5-5-15 OS4.1.6 & Lubuntu13.04/mintppc11 with Kernel 3.8.7/3.9
- trevordick
- A-Eon Technology
- Posts: 1385
- Joined: Mon Dec 20, 2010 1:28 pm
Re: Linux kernel 3.5.7 and HD6670
Thanks for tracking this down. I also get around 1500 fps with Linux Mint and RadeonHD 6570.zappa2009 wrote:nice i get 1458 fps with glxgears wih my RadeonHD 5450.
Trevor
I'm just Breezin'
Re: Linux kernel 3.5.7 and HD6670
Ists a little creepy Linux on X1000.
I must make some Coldboot to geht to the Desktop of mintppc11.
On some Coldboots I get a "segmentation fault" Then Reset and try again and voila ist geting good or another Rest is needet.
OS4.1.6 boots fine only Linux gets wrong.
If boots to the mintppc Loginscreen the System runs fine.
I have 2GB inside as a Single Module. Better use 2x1GB ?
I must make some Coldboot to geht to the Desktop of mintppc11.
On some Coldboots I get a "segmentation fault" Then Reset and try again and voila ist geting good or another Rest is needet.
OS4.1.6 boots fine only Linux gets wrong.
If boots to the mintppc Loginscreen the System runs fine.
I have 2GB inside as a Single Module. Better use 2x1GB ?
X1000 RadeonHD5450 4GB (2x2GB) DDR2-PC2-8500 Kingston HyperX 5-5-5-5-15 OS4.1.6 & Lubuntu13.04/mintppc11 with Kernel 3.8.7/3.9
- trevordick
- A-Eon Technology
- Posts: 1385
- Joined: Mon Dec 20, 2010 1:28 pm
Re: Linux kernel 3.5.7 and HD6670
Interesting inhibiting the Radeon 9250 with the 10-monitor.conf fix also works with Debian Wheezy with a dual gfx card configuration (RadeonHD 6570 & Radeon 9250)
Trevor
Trevor
I'm just Breezin'