I am almost certain that I changed uboot variable scan_usb_storage to 0 with kb plugged into hub, but it doesn't work now.
I wasn't sure what sequence I should plug things in, so I did it two ways.
Procedure 1: nothing, keyboard into front port, trackball into other front port, powered hub (except I forgot to power it) into back port.
Procedure 2: nothing, powered hub (on) into front port, keyboard into hub, trackball into hub.
The logs are identical through about line 32, then the order of things changes. The "times" given in the log also change. Both logs were dated 02/01/2012 11:38, but actually created at about 14:30, give or take a few minutes.
Hidden Text - Click to Show :
I: [00:00:04] USB stack | | ==========
I: [00:00:04] USB stack | | USB System Software Task started
I: [00:00:04] USB stack | | Starting HCDs...
E: [00:00:04] USB stack | New Fkt | fkt: 0x5FE0A1F0 = Level -1
E: [00:00:04] USB stack | New Fkt | fkt: 0x5FE0A290 = Level 0
I: [00:00:04] EHCI Controller Task Unit 0 | EHCI | Another driver seems to use the PPC460ex USB hardware. Sending shut down notification.
W: [00:00:04] OHCI Controller Task Unit 0 | OHCI | Received request to shutdown unit 0.
W: [00:00:04] OHCI Controller Task Unit 0 | OHCI | Releasing lock for unit 0.
I: [00:00:04] EHCI Controller Task Unit 0 | EHCI | Successfully locked PPC460ex USB hardware.
E: [00:00:04] USB stack | New Fkt | fkt: 0x5FE0A330 = Level -1
E: [00:00:04] USB stack | New Fkt | fkt: 0x5FE0A3D0 = Level 0
I: [00:00:04] USB stack | | ...HCDs started.
I: [00:00:04] USB Fkt Init | Init Fkt | Fkt 0x5FE0A290 is {Vendor: 0x0000, Product: 0x0000, Class: 09.00}
I: [00:00:04] USB Fkt Init | Init Fkt | Fkt 0x5FE0A3D0 is {Vendor: 0x0000, Product: 0x0000, Class: 09.00}
I: [00:00:04] USB Fkt Init | Init Fkt | Fkt 0x5FE0A290 initialized
I: [00:00:04] USB Fkt Init | Init Fkt | Fkt 0x5FE0A3D0 initialized
I: [00:00:04] hub.usbfd | HUB | Hub "Rear Roothub (ohci.usbhcd/0)" has TT thinktime of 8 full speed bittimes and protocol 0
I: [00:00:04] hub.usbfd | HUB | Hub "Rear Roothub (ehci.usbhcd/0)" has TT thinktime of 8 full speed bittimes and protocol 0
I: [00:00:04] hub.usbfd | HUB | All ports are empty
I: [00:00:04] hub.usbfd | HUB | Device found on port 1 of hub "Rear Roothub (ehci.usbhcd/0)".
I: [00:00:05] hub.usbfd | Hub port | Device at port 1 of hub "Rear Roothub (ehci.usbhcd/0)" is high-speed.
E: [00:00:05] USB stack | New Fkt | fkt: 0x5FE0A5B0 = Level 1
I: [00:00:05] hub.usbfd | HUB | Device on hub port 1 successfully added.
I: [00:00:05] EHCI Controller Task Unit 0 | EHCI | Port 0 is not in reset state.
I: [00:00:05] hub.usbfd | HUB | Driver Running
I: [00:00:05] USB Fkt Init | Init Fkt | Fkt 0x5FE0A5B0 is {Vendor: 0x0424, Product: 0x2517, Class: 09.00}
I: [00:00:05] USB Fkt Init | Init Fkt | Fkt 0x5FE0A5B0 initialized
I: [00:00:05] hub.usbfd | HUB | Now configured to use multiple TTs
I: [00:00:05] hub.usbfd | HUB | Hub "" has TT thinktime of 8 full speed bittimes and protocol 2
I: [00:00:05] hub.usbfd | HUB | Device found on port 5 of hub "".
I: [00:00:05] hub.usbfd | Hub port | Device at port 5 of hub "" is low-speed.
Up to this point, line 31 of log, both logs identical.
Next lines through 14:29:20 (line 75 of log) result from 1st order of attachment.
E: [00:00:06] USB stack | New Fkt | fkt: 0x5FE0A6F0 = Level 2
I: [00:00:06] hub.usbfd | HUB | Device on hub port 5 successfully added.
I: [00:00:06] hub.usbfd | HUB | Device found on port 7 of hub "".
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0A6F0 is {Vendor: 0x0B39, Product: 0x0001, Class: 00.00}
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0A6F0 initialized
I: [00:00:06] hub.usbfd | Hub port | Device at port 7 of hub "" is high-speed.
E: [00:00:06] USB stack | New Fkt | fkt: 0x5FE0A790 = Level 2
I: [00:00:06] hub.usbfd | HUB | Device on hub port 7 successfully added.
I: [00:00:06] hub.usbfd | HUB | Driver Running
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0A790 is {Vendor: 0x0424, Product: 0x2240, Class: 00.00}
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0A790 initialized
I: [00:00:06] MassStorage Device Task | Massstorage | Lun 0 has device type 0x00 (Direct access) and is removable
I: [00:00:06] hub.usbfd | HUB | Device found on port 6 of hub "".
I: [00:00:07] hub.usbfd | Hub port | Device at port 6 of hub "" is low-speed.
E: [00:00:07] USB stack | New Fkt | fkt: 0x5FE0A970 = Level 2
I: [00:00:07] hub.usbfd | HUB | Device on hub port 6 successfully added.
I: [00:00:07] USB Fkt Init | Init Fkt | Fkt 0x5FE0A970 is {Vendor: 0x046D, Product: 0xC404, Class: 00.00}
I: [00:00:07] USB Fkt Init | Init Fkt | Fkt 0x5FE0A970 initialized
I: [00:00:07] MassStorage Device Task | Sys_EndInitialAttachmentPhase | Initial USB Attachment Phase terminated
I: [11:38:13] USB stack Process | | USB System Software Process started.
I: [11:38:13] USB stack Process | | Reading FD descriptors...
I: [11:38:13] USB stack Process | | ...FD infos read
I: [11:38:13] USB stack Process | Rebind FD | Weak FD "bootkeyboard.usbfd" for Ifc 0x5FD59080 is being preempted.
I: [11:38:13] USB stack Process | Rebind FD | Weak FD "bootmouse.usbfd" for Ifc 0x5FD59100 is being preempted.
I: [11:38:13] USB stack Process | Rebind FD | Weak FD "bootmouse.usbfd" for Ifc 0x5FD596C0 is being preempted.
I: [11:38:13] USB stack Process | | Starting HCDs...
I: [11:38:13] USB stack Process | | ...HCDs started.
I: [11:38:13] USB stack Process | Sys_EndInitialAttachmentPhase | Initial USB Attachment Phase terminated
I: [11:38:13] USB stack Process | | USB stack fullbooted
I: [14:29:19] hub.usbfd | HUB | Device found on port 1 of hub "".
I: [14:29:19] hub.usbfd | Hub port | Device at port 1 of hub "" is high-speed.
E: [14:29:19] USB stack | New Fkt | fkt: 0x51171970 = Level 2
I: [14:29:19] hub.usbfd | HUB | Device on hub port 1 successfully added.
I: [14:29:19] USB Fkt Init | Init Fkt | Fkt 0x51171970 is {Vendor: 0x1A40, Product: 0x0201, Class: 09.00}
I: [14:29:19] USB Fkt Init | Init Fkt | Fkt 0x51171970 initialized
I: [14:29:19] hub.usbfd | HUB | Now configured to use multiple TTs
I: [14:29:19] hub.usbfd | HUB | Hub "USB 2.0 Hub [MTT]" has TT thinktime of 8 full speed bittimes and protocol 2
I: [14:29:20] hub.usbfd | HUB | Device found on port 4 of hub "USB 2.0 Hub [MTT]".
I: [14:29:20] hub.usbfd | Hub port | Device at port 4 of hub "USB 2.0 Hub [MTT]" is high-speed.
E: [14:29:20] USB stack | New Fkt | fkt: 0x51171ab0 = Level 3
I: [14:29:20] hub.usbfd | HUB | Device on hub port 4 successfully added.
I: [14:29:20] hub.usbfd | HUB | Driver Running
I: [14:29:20] USB Fkt Init | Init Fkt | Fkt 0x51171AB0 is {Vendor: 0x05E3, Product: 0x0716, Class: 00.00}
I: [14:29:20] USB Fkt Init | Init Fkt | Fkt 0x51171AB0 initialized
Below are lines 32 through 79 resulting from the 2nd order of attachment
I: [00:00:06] hub.usbfd | HUB | Device on hub port 6 successfully added.
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0A6F0 is {Vendor: 0x1A40, Product: 0x0201, Class: 09.00}
I: [00:00:06] hub.usbfd | HUB | Device found on port 7 of hub "".
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0A6F0 initialized
I: [00:00:06] hub.usbfd | HUB | Now configured to use multiple TTs
I: [00:00:06] hub.usbfd | HUB | Hub "USB 2.0 Hub [MTT]" has TT thinktime of 8 full speed bittimes and protocol 2
I: [00:00:06] hub.usbfd | Hub port | Device at port 7 of hub "" is high-speed.
E: [00:00:06] USB stack | New Fkt | fkt: 0x5FE0A830 = Level 2
I: [00:00:06] hub.usbfd | HUB | Device on hub port 7 successfully added.
I: [00:00:06] hub.usbfd | HUB | Driver Running
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0A830 is {Vendor: 0x0424, Product: 0x2240, Class: 00.00}
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0A830 initialized
I: [00:00:06] MassStorage Device Task | Massstorage | Lun 0 has device type 0x00 (Direct access) and is removable
I: [00:00:06] hub.usbfd | HUB | Device found on port 1 of hub "USB 2.0 Hub [MTT]".
I: [00:00:06] hub.usbfd | Hub port | Device at port 1 of hub "USB 2.0 Hub [MTT]" is low-speed.
E: [00:00:06] USB stack | New Fkt | fkt: 0x5FE0AA10 = Level 3
I: [00:00:06] hub.usbfd | HUB | Device on hub port 1 successfully added.
I: [00:00:06] hub.usbfd | HUB | Device found on port 4 of hub "USB 2.0 Hub [MTT]".
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0AA10 is {Vendor: 0x046D, Product: 0xC404, Class: 00.00}
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0AA10 initialized
I: [00:00:06] hub.usbfd | Hub port | Device at port 4 of hub "USB 2.0 Hub [MTT]" is high-speed.
E: [00:00:06] USB stack | New Fkt | fkt: 0x5FE0AAB0 = Level 3
I: [00:00:06] hub.usbfd | HUB | Device on hub port 4 successfully added.
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0AAB0 is {Vendor: 0x05E3, Product: 0x0716, Class: 00.00}
I: [00:00:06] hub.usbfd | HUB | Device found on port 5 of hub "USB 2.0 Hub [MTT]".
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0AAB0 initialized
I: [00:00:07] hub.usbfd | Hub port | Device at port 5 of hub "USB 2.0 Hub [MTT]" is low-speed.
E: [00:00:07] USB stack | New Fkt | fkt: 0x5FE0AB50 = Level 3
I: [00:00:07] hub.usbfd | HUB | Device on hub port 5 successfully added.
I: [00:00:07] hub.usbfd | HUB | Driver Running
I: [00:00:07] USB Fkt Init | Init Fkt | Fkt 0x5FE0AB50 is {Vendor: 0x0B39, Product: 0x0001, Class: 00.00}
I: [00:00:07] USB Fkt Init | Init Fkt | Fkt 0x5FE0AB50 initialized
I: [00:00:07] MassStorage Device Task | Massstorage | Lun 0 has device type 0x00 (Direct access) and is removable
I: [00:00:07] MassStorage Device Task | Massstorage | Lun 1 has device type 0x00 (Direct access) and is removable
I: [00:00:07] MassStorage Device Task | Massstorage | Lun 2 has device type 0x00 (Direct access) and is removable
I: [00:00:07] MassStorage Device Task | Massstorage | Lun 3 has device type 0x00 (Direct access) and is removable
I: [00:00:08] MassStorage Device Task | Sys_EndInitialAttachmentPhase | Initial USB Attachment Phase terminated
I: [11:38:13] USB stack Process | | USB System Software Process started.
I: [11:38:13] USB stack Process | | Reading FD descriptors...
I: [11:38:13] USB stack Process | | ...FD infos read
I: [11:38:13] USB stack Process | Rebind FD | Weak FD "bootmouse.usbfd" for Ifc 0x5FD59680 is being preempted.
I: [11:38:13] USB stack Process | Rebind FD | Weak FD "bootkeyboard.usbfd" for Ifc 0x5FD59AC0 is being preempted.
I: [11:38:13] USB stack Process | Rebind FD | Weak FD "bootmouse.usbfd" for Ifc 0x5FD59B40 is being preempted.
I: [11:38:13] USB stack Process | | Starting HCDs...
I: [11:38:13] USB stack Process | | ...HCDs started.
I: [11:38:13] USB stack Process | Sys_EndInitialAttachmentPhase | Initial USB Attachment Phase terminated
I: [11:38:13] USB stack Process | | USB stack fullbooted
I: [00:00:04] USB stack | | USB System Software Task started
I: [00:00:04] USB stack | | Starting HCDs...
E: [00:00:04] USB stack | New Fkt | fkt: 0x5FE0A1F0 = Level -1
E: [00:00:04] USB stack | New Fkt | fkt: 0x5FE0A290 = Level 0
I: [00:00:04] EHCI Controller Task Unit 0 | EHCI | Another driver seems to use the PPC460ex USB hardware. Sending shut down notification.
W: [00:00:04] OHCI Controller Task Unit 0 | OHCI | Received request to shutdown unit 0.
W: [00:00:04] OHCI Controller Task Unit 0 | OHCI | Releasing lock for unit 0.
I: [00:00:04] EHCI Controller Task Unit 0 | EHCI | Successfully locked PPC460ex USB hardware.
E: [00:00:04] USB stack | New Fkt | fkt: 0x5FE0A330 = Level -1
E: [00:00:04] USB stack | New Fkt | fkt: 0x5FE0A3D0 = Level 0
I: [00:00:04] USB stack | | ...HCDs started.
I: [00:00:04] USB Fkt Init | Init Fkt | Fkt 0x5FE0A290 is {Vendor: 0x0000, Product: 0x0000, Class: 09.00}
I: [00:00:04] USB Fkt Init | Init Fkt | Fkt 0x5FE0A3D0 is {Vendor: 0x0000, Product: 0x0000, Class: 09.00}
I: [00:00:04] USB Fkt Init | Init Fkt | Fkt 0x5FE0A290 initialized
I: [00:00:04] USB Fkt Init | Init Fkt | Fkt 0x5FE0A3D0 initialized
I: [00:00:04] hub.usbfd | HUB | Hub "Rear Roothub (ohci.usbhcd/0)" has TT thinktime of 8 full speed bittimes and protocol 0
I: [00:00:04] hub.usbfd | HUB | Hub "Rear Roothub (ehci.usbhcd/0)" has TT thinktime of 8 full speed bittimes and protocol 0
I: [00:00:04] hub.usbfd | HUB | All ports are empty
I: [00:00:04] hub.usbfd | HUB | Device found on port 1 of hub "Rear Roothub (ehci.usbhcd/0)".
I: [00:00:05] hub.usbfd | Hub port | Device at port 1 of hub "Rear Roothub (ehci.usbhcd/0)" is high-speed.
E: [00:00:05] USB stack | New Fkt | fkt: 0x5FE0A5B0 = Level 1
I: [00:00:05] hub.usbfd | HUB | Device on hub port 1 successfully added.
I: [00:00:05] EHCI Controller Task Unit 0 | EHCI | Port 0 is not in reset state.
I: [00:00:05] hub.usbfd | HUB | Driver Running
I: [00:00:05] USB Fkt Init | Init Fkt | Fkt 0x5FE0A5B0 is {Vendor: 0x0424, Product: 0x2517, Class: 09.00}
I: [00:00:05] USB Fkt Init | Init Fkt | Fkt 0x5FE0A5B0 initialized
I: [00:00:05] hub.usbfd | HUB | Now configured to use multiple TTs
I: [00:00:05] hub.usbfd | HUB | Hub "" has TT thinktime of 8 full speed bittimes and protocol 2
I: [00:00:05] hub.usbfd | HUB | Device found on port 5 of hub "".
I: [00:00:05] hub.usbfd | Hub port | Device at port 5 of hub "" is low-speed.
Up to this point, line 31 of log, both logs identical.
Next lines through 14:29:20 (line 75 of log) result from 1st order of attachment.
E: [00:00:06] USB stack | New Fkt | fkt: 0x5FE0A6F0 = Level 2
I: [00:00:06] hub.usbfd | HUB | Device on hub port 5 successfully added.
I: [00:00:06] hub.usbfd | HUB | Device found on port 7 of hub "".
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0A6F0 is {Vendor: 0x0B39, Product: 0x0001, Class: 00.00}
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0A6F0 initialized
I: [00:00:06] hub.usbfd | Hub port | Device at port 7 of hub "" is high-speed.
E: [00:00:06] USB stack | New Fkt | fkt: 0x5FE0A790 = Level 2
I: [00:00:06] hub.usbfd | HUB | Device on hub port 7 successfully added.
I: [00:00:06] hub.usbfd | HUB | Driver Running
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0A790 is {Vendor: 0x0424, Product: 0x2240, Class: 00.00}
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0A790 initialized
I: [00:00:06] MassStorage Device Task | Massstorage | Lun 0 has device type 0x00 (Direct access) and is removable
I: [00:00:06] hub.usbfd | HUB | Device found on port 6 of hub "".
I: [00:00:07] hub.usbfd | Hub port | Device at port 6 of hub "" is low-speed.
E: [00:00:07] USB stack | New Fkt | fkt: 0x5FE0A970 = Level 2
I: [00:00:07] hub.usbfd | HUB | Device on hub port 6 successfully added.
I: [00:00:07] USB Fkt Init | Init Fkt | Fkt 0x5FE0A970 is {Vendor: 0x046D, Product: 0xC404, Class: 00.00}
I: [00:00:07] USB Fkt Init | Init Fkt | Fkt 0x5FE0A970 initialized
I: [00:00:07] MassStorage Device Task | Sys_EndInitialAttachmentPhase | Initial USB Attachment Phase terminated
I: [11:38:13] USB stack Process | | USB System Software Process started.
I: [11:38:13] USB stack Process | | Reading FD descriptors...
I: [11:38:13] USB stack Process | | ...FD infos read
I: [11:38:13] USB stack Process | Rebind FD | Weak FD "bootkeyboard.usbfd" for Ifc 0x5FD59080 is being preempted.
I: [11:38:13] USB stack Process | Rebind FD | Weak FD "bootmouse.usbfd" for Ifc 0x5FD59100 is being preempted.
I: [11:38:13] USB stack Process | Rebind FD | Weak FD "bootmouse.usbfd" for Ifc 0x5FD596C0 is being preempted.
I: [11:38:13] USB stack Process | | Starting HCDs...
I: [11:38:13] USB stack Process | | ...HCDs started.
I: [11:38:13] USB stack Process | Sys_EndInitialAttachmentPhase | Initial USB Attachment Phase terminated
I: [11:38:13] USB stack Process | | USB stack fullbooted
I: [14:29:19] hub.usbfd | HUB | Device found on port 1 of hub "".
I: [14:29:19] hub.usbfd | Hub port | Device at port 1 of hub "" is high-speed.
E: [14:29:19] USB stack | New Fkt | fkt: 0x51171970 = Level 2
I: [14:29:19] hub.usbfd | HUB | Device on hub port 1 successfully added.
I: [14:29:19] USB Fkt Init | Init Fkt | Fkt 0x51171970 is {Vendor: 0x1A40, Product: 0x0201, Class: 09.00}
I: [14:29:19] USB Fkt Init | Init Fkt | Fkt 0x51171970 initialized
I: [14:29:19] hub.usbfd | HUB | Now configured to use multiple TTs
I: [14:29:19] hub.usbfd | HUB | Hub "USB 2.0 Hub [MTT]" has TT thinktime of 8 full speed bittimes and protocol 2
I: [14:29:20] hub.usbfd | HUB | Device found on port 4 of hub "USB 2.0 Hub [MTT]".
I: [14:29:20] hub.usbfd | Hub port | Device at port 4 of hub "USB 2.0 Hub [MTT]" is high-speed.
E: [14:29:20] USB stack | New Fkt | fkt: 0x51171ab0 = Level 3
I: [14:29:20] hub.usbfd | HUB | Device on hub port 4 successfully added.
I: [14:29:20] hub.usbfd | HUB | Driver Running
I: [14:29:20] USB Fkt Init | Init Fkt | Fkt 0x51171AB0 is {Vendor: 0x05E3, Product: 0x0716, Class: 00.00}
I: [14:29:20] USB Fkt Init | Init Fkt | Fkt 0x51171AB0 initialized
Below are lines 32 through 79 resulting from the 2nd order of attachment
I: [00:00:06] hub.usbfd | HUB | Device on hub port 6 successfully added.
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0A6F0 is {Vendor: 0x1A40, Product: 0x0201, Class: 09.00}
I: [00:00:06] hub.usbfd | HUB | Device found on port 7 of hub "".
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0A6F0 initialized
I: [00:00:06] hub.usbfd | HUB | Now configured to use multiple TTs
I: [00:00:06] hub.usbfd | HUB | Hub "USB 2.0 Hub [MTT]" has TT thinktime of 8 full speed bittimes and protocol 2
I: [00:00:06] hub.usbfd | Hub port | Device at port 7 of hub "" is high-speed.
E: [00:00:06] USB stack | New Fkt | fkt: 0x5FE0A830 = Level 2
I: [00:00:06] hub.usbfd | HUB | Device on hub port 7 successfully added.
I: [00:00:06] hub.usbfd | HUB | Driver Running
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0A830 is {Vendor: 0x0424, Product: 0x2240, Class: 00.00}
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0A830 initialized
I: [00:00:06] MassStorage Device Task | Massstorage | Lun 0 has device type 0x00 (Direct access) and is removable
I: [00:00:06] hub.usbfd | HUB | Device found on port 1 of hub "USB 2.0 Hub [MTT]".
I: [00:00:06] hub.usbfd | Hub port | Device at port 1 of hub "USB 2.0 Hub [MTT]" is low-speed.
E: [00:00:06] USB stack | New Fkt | fkt: 0x5FE0AA10 = Level 3
I: [00:00:06] hub.usbfd | HUB | Device on hub port 1 successfully added.
I: [00:00:06] hub.usbfd | HUB | Device found on port 4 of hub "USB 2.0 Hub [MTT]".
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0AA10 is {Vendor: 0x046D, Product: 0xC404, Class: 00.00}
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0AA10 initialized
I: [00:00:06] hub.usbfd | Hub port | Device at port 4 of hub "USB 2.0 Hub [MTT]" is high-speed.
E: [00:00:06] USB stack | New Fkt | fkt: 0x5FE0AAB0 = Level 3
I: [00:00:06] hub.usbfd | HUB | Device on hub port 4 successfully added.
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0AAB0 is {Vendor: 0x05E3, Product: 0x0716, Class: 00.00}
I: [00:00:06] hub.usbfd | HUB | Device found on port 5 of hub "USB 2.0 Hub [MTT]".
I: [00:00:06] USB Fkt Init | Init Fkt | Fkt 0x5FE0AAB0 initialized
I: [00:00:07] hub.usbfd | Hub port | Device at port 5 of hub "USB 2.0 Hub [MTT]" is low-speed.
E: [00:00:07] USB stack | New Fkt | fkt: 0x5FE0AB50 = Level 3
I: [00:00:07] hub.usbfd | HUB | Device on hub port 5 successfully added.
I: [00:00:07] hub.usbfd | HUB | Driver Running
I: [00:00:07] USB Fkt Init | Init Fkt | Fkt 0x5FE0AB50 is {Vendor: 0x0B39, Product: 0x0001, Class: 00.00}
I: [00:00:07] USB Fkt Init | Init Fkt | Fkt 0x5FE0AB50 initialized
I: [00:00:07] MassStorage Device Task | Massstorage | Lun 0 has device type 0x00 (Direct access) and is removable
I: [00:00:07] MassStorage Device Task | Massstorage | Lun 1 has device type 0x00 (Direct access) and is removable
I: [00:00:07] MassStorage Device Task | Massstorage | Lun 2 has device type 0x00 (Direct access) and is removable
I: [00:00:07] MassStorage Device Task | Massstorage | Lun 3 has device type 0x00 (Direct access) and is removable
I: [00:00:08] MassStorage Device Task | Sys_EndInitialAttachmentPhase | Initial USB Attachment Phase terminated
I: [11:38:13] USB stack Process | | USB System Software Process started.
I: [11:38:13] USB stack Process | | Reading FD descriptors...
I: [11:38:13] USB stack Process | | ...FD infos read
I: [11:38:13] USB stack Process | Rebind FD | Weak FD "bootmouse.usbfd" for Ifc 0x5FD59680 is being preempted.
I: [11:38:13] USB stack Process | Rebind FD | Weak FD "bootkeyboard.usbfd" for Ifc 0x5FD59AC0 is being preempted.
I: [11:38:13] USB stack Process | Rebind FD | Weak FD "bootmouse.usbfd" for Ifc 0x5FD59B40 is being preempted.
I: [11:38:13] USB stack Process | | Starting HCDs...
I: [11:38:13] USB stack Process | | ...HCDs started.
I: [11:38:13] USB stack Process | Sys_EndInitialAttachmentPhase | Initial USB Attachment Phase terminated
I: [11:38:13] USB stack Process | | USB stack fullbooted