Hyperion Entertainment Message Boards

Hi All,

I successfully tested the RC8 of kernel 5.3 with Fienix on my A-EON AmigaOne X1000 today.

Screenshot of Fienix with the kernel 5.3-rc8 connected to wifi and to bluetooth speakers for using ViewTube in the new Arctic Fox 27.9.18:



Please test the RC8.

Thanks,
Christian

Kernel 5.3 RC8 is running fine on the AmigaOne X5000 !



Big picture.. http://www.skateman.nl/wp-content/uploa ... 211730.png

Sorry for the delay

Skateman wrote:Kernel 5.3 RC8 is running fine on the AmigaOne X5000 !

Sorry for the delay

Hi Skateman,

Thanks a lot for testing the RC8!

Cheers,
Christian

Hi All,

Here is the final version of kernel 5.3 for the X5000, X1000, and A1222.

• Linux 5.3 was released on Sun, 15 Sep 2019 -- kernelnewbies.org
• Linux 5.3 Kernel Released With AMD Navi Support, Intel Speed Select & More -- phoronix.com
• Torvalds' announcement
• Linux Git log
• Phoronix articles, reviews and news stories covering Linux 5.3

Download: linux-image-5.3-X1000_X5000_A1222.tar.gz

Screenshot of Debian 10 PowerPCSPE with the final kernel 5.3 on the Tabor board (A1222):



You can also see the repositories with the last packages of Debian PowerPCSPE on the screenshot.

Cheers,
Christian

Final kernel 5.3 up and running on the AmigaOne X5000!



Big picture http://www.skateman.nl/wp-content/uploa ... 094645.png

Skateman wrote:Final kernel 5.3 up and running on the AmigaOne X5000!

Fantastic! Many thanks for testing! Have a nice weekend!

Christian
5.3 Final boots fine to SI card and Logitech mouse works. Thanks for your hard work.

ace

acefnq wrote:Christian
5.3 Final boots fine to SI card and Logitech mouse works. Thanks for your hard work.

ace

Thanks a lot for testing! Have a nice weekend!

I noticed that Kernel 5.3 has created a problem which does not exist in 4.20 or earlier... If there is a Dawicontrol DC 2976 UW SCSI board (PCI) installed, the system does not boot unless the RAM is limited to 3500M. This happens now even when there is nothing connected to the controller!

Roland wrote:I noticed that Kernel 5.3 has created a problem which does not exist in 4.20 or earlier... If there is a Dawicontrol DC 2976 UW SCSI board (PCI) installed, the system does not boot unless the RAM is limited to 3500M. This happens now even when there is nothing connected to the controller!

Hi Roland,

Thanks a lot for reporting the issue with the Dawicontrol DC 2976 UW SCSI board (PCI).

Could you please test the RC2 of kernel 5.4 with this SCSI board? I would like to know if the problem still exists in the latest kernel.

Please post the results in the kernel 5.4 test thread.

Thanks in advance,

Christian