Page 9 of 9
Re: Kernel 5.3
Posted: Tue Sep 10, 2019 2:25 pm
by xeno74
Hi All,
I successfully tested the
RC8 of kernel
5.3 with Fienix on my A-EON AmigaOne X1000 today.
Screenshot of Fienix with the kernel 5.3-rc8 connected to wifi and to bluetooth speakers for using ViewTube in the new Arctic Fox 27.9.18:
Please test the RC8.
Thanks,
Christian
Re: Kernel 5.3
Posted: Tue Sep 10, 2019 8:20 pm
by Skateman
Kernel 5.3 RC8 is running fine on the AmigaOne X5000 !
Big picture..
http://www.skateman.nl/wp-content/uploa ... 211730.png
Sorry for the delay
Re: Kernel 5.3
Posted: Wed Sep 11, 2019 4:32 am
by xeno74
Skateman wrote:Kernel 5.3 RC8 is running fine on the AmigaOne X5000 !
Sorry for the delay
Hi Skateman,
Thanks a lot for testing the RC8!
Cheers,
Christian
Re: Kernel 5.3
Posted: Mon Sep 16, 2019 1:39 pm
by xeno74
Hi All,
Here is the final version of kernel 5.3 for the X5000, X1000, and A1222.
Download:
linux-image-5.3-X1000_X5000_A1222.tar.gz
Screenshot of Debian 10 PowerPCSPE with the final kernel 5.3 on the Tabor board (A1222):
You can also see the repositories with the last packages of Debian PowerPCSPE on the screenshot.
Cheers,
Christian
Re: Kernel 5.3
Posted: Fri Sep 20, 2019 8:49 am
by Skateman
Final kernel 5.3 up and running on the AmigaOne X5000!
Big picture
http://www.skateman.nl/wp-content/uploa ... 094645.png
Re: Kernel 5.3
Posted: Fri Sep 20, 2019 8:57 am
by xeno74
Skateman wrote:Final kernel 5.3 up and running on the AmigaOne X5000!
Fantastic!
Many thanks for testing!
Have a nice weekend!
Re: Kernel 5.3
Posted: Fri Sep 20, 2019 2:18 pm
by acefnq
Christian
5.3 Final boots fine to SI card and Logitech mouse works. Thanks for your hard work.
ace
Re: Kernel 5.3
Posted: Fri Sep 20, 2019 2:53 pm
by xeno74
acefnq wrote:Christian
5.3 Final boots fine to SI card and Logitech mouse works. Thanks for your hard work.
ace
Thanks a lot for testing!
Have a nice weekend!
Re: Kernel 5.3
Posted: Fri Oct 11, 2019 5:50 pm
by Roland
I noticed that Kernel 5.3 has created a problem which does not exist in 4.20 or earlier... If there is a Dawicontrol DC 2976 UW SCSI board (PCI) installed, the system does not boot unless the RAM is limited to 3500M. This happens now even when there is nothing connected to the controller!
Re: Kernel 5.3
Posted: Fri Oct 11, 2019 7:36 pm
by xeno74
Roland wrote:I noticed that Kernel 5.3 has created a problem which does not exist in 4.20 or earlier... If there is a Dawicontrol DC 2976 UW SCSI board (PCI) installed, the system does not boot unless the RAM is limited to 3500M. This happens now even when there is nothing connected to the controller!
Hi Roland,
Thanks a lot for reporting the issue with the
Dawicontrol DC 2976 UW SCSI board (PCI).
Could you please test the
RC2 of kernel
5.4 with this SCSI board? I would like to know if the problem still exists in the latest kernel.
Please post the results in the
kernel 5.4 test thread.
Thanks in advance,
Christian