Page 7 of 8
Re: Kernel 5.2
Posted: Fri Jun 14, 2019 4:49 am
by acefnq
Christian
RC4 works fine, boots to Firepro and Logitech mouse works. -:)
ace
Re: Kernel 5.2
Posted: Fri Jun 14, 2019 6:57 am
by xeno74
acefnq wrote:Christian
RC4 works fine, boots to Firepro and Logitech mouse works. -:)
ace
Hi Ace,
Many thanks for testing the RC4. Good to know, that your mouse and Firepro work with the RC4. Could you please post your result with your mouse in the
bug report thread?
Michel wrote:
(In reply to Allan Cairns from comment #47)
> My Amigone x5000 would only boot to a black screen. No ability to input.
Please attach the corresponding Xorg log file. If you can't log into the system remotely, it should be available as Xorg.0.log.old after rebooting.
Could you please post your xorg log file with the
uImage-drm10 with the following modified xorg.conf?
Code: Select all
Section "Device"
Identifier "ATI RV620 [FirePro 2260]"
BusID "PCI:5@4096:0:0"
EndSection
Thanks,
Christian
Re: Kernel 5.2
Posted: Sat Jun 15, 2019 8:14 am
by acefnq
Christian
have posted the outcomes on the bug site, however in relation to the log I cannot get it because:
1. Using the example xorg.conf and uImage-drm10 I cannot access the xserver at all (noting the log will be saved)
2. My subsequent reboot also fails due to the xorg.conf still being in the system. This time I can access shell screemns and remove the xorg.conf but will require another reboot.
3. The old log now reflects the second reboot as detailed above.
ace
Re: Kernel 5.2
Posted: Sat Jun 15, 2019 2:24 pm
by xeno74
acefnq wrote:Christian
have posted the outcomes on the bug site, however in relation to the log I cannot get it because:
1. Using the example xorg.conf and uImage-drm10 I cannot access the xserver at all (noting the log will be saved)
2. My subsequent reboot also fails due to the xorg.conf still being in the system. This time I can access shell screemns and remove the xorg.conf but will require another reboot.
3. The old log now reflects the second reboot as detailed above.
ace
Hi Ace,
Many thanks for testing!
Could you please also post your results in the
bug report thread?
Cheers,
Christian
Re: Kernel 5.2
Posted: Mon Jun 17, 2019 6:48 pm
by xeno74
Hi All,
I released the
RC5 of kernel
5.2 for testing today.
New:
It also includes:
- X1000: pcmcia-v2 patch for solving the issues with new CF cards connected to the onboard CompactFlash Card Slot
- X5000 and X1000: vgaarb patch for solving the issue with two graphics cards in an AmigaOne. Link to the bug report: Bug 109345 - drm-next-2018-12-14 -Linux PPC
- X1000: Enabled the kernel config options CONFIG_PATA_PCMCIA, CONFIG_PCMCIA, and CONFIG_ELECTRA_CF for the pcmcia-v2 patch
- X1000: compressed kernel (zImage) and uncompressed kernel (vmlinux)
CF cards test thread:
forum.hyperion-entertainment.com
Download:
linux-image-5.2-rc5_X1000_X5000.tar.gz
@SailorMH
Please test it with your CF cards.
@Ace
Please test it with your two installed graphics cards and with your Logitech wireless USB mouse.
Thanks,
Christian
Re: Kernel 5.2
Posted: Tue Jun 18, 2019 7:43 pm
by Skateman
Kernel 5.2 RC5 is all fine on the AmigaOne X5000
Big picture
http://www.skateman.nl/wp-content/uploa ... 203922.png
Keep up the good work Christian!
Re: Kernel 5.2
Posted: Tue Jun 18, 2019 8:15 pm
by xeno74
Skateman wrote:Kernel 5.2 RC5 is all fine on the AmigaOne X5000
Keep up the good work Christian!
Hi Skateman,
Thanks a lot for testing the RC5 and many thanks for the screenshot!
Cheers,
Christian
Re: Kernel 5.2
Posted: Mon Jun 24, 2019 9:48 am
by xeno74
Hi All,
I released the
RC6 of kernel
5.2 for testing today.
New:
It also includes:
- X5000 and X1000: vgaarb patch for solving the issue with two graphics cards in an AmigaOne. Link to the bug report: Bug 109345 - drm-next-2018-12-14 -Linux PPC
- X1000: Enabled the kernel config options CONFIG_PATA_PCMCIA, CONFIG_PCMCIA, and CONFIG_ELECTRA_CF for the pcmcia-v3 patch
- X1000: compressed kernel (zImage) and uncompressed kernel (vmlinux)
Download:
linux-image-5.2-rc6_X1000_X5000.tar.gz
Screenshot of a Samba AD-DC with kernel 5.2-rc6 and with Windows connected via VNC for using the RSAT tools (X5000):
@SailorMH
Please test it with your CF cards.
@Ace
Please test it with your two installed graphics cards and with your Logitech wireless USB mouse.
Thanks,
Christian
Re: Kernel 5.2
Posted: Wed Jun 26, 2019 4:29 am
by xeno74
acefnq wrote:Christian
have posted the outcomes on the bug site, however in relation to the log I cannot get it because:
1. Using the example xorg.conf and uImage-drm10 I cannot access the xserver at all (noting the log will be saved)
2. My subsequent reboot also fails due to the xorg.conf still being in the system. This time I can access shell screemns and remove the xorg.conf but will require another reboot.
3. The old log now reflects the second reboot as detailed above.
ace
Hi Allan,
We still have to use the vgaarb patch. Could you please update the bug report with your results? Maybe Michel has another solution.
Link:
Bug 109345 - drm-next-2018-12-14 -Linux PPC
Thanks,
Christian
Re: Kernel 5.2
Posted: Wed Jun 26, 2019 11:29 am
by acefnq
Christian
Sorry but I can't get any logs. Once it fails I have to reboot and remove thexorg.conf which in turn requires another reboot thus overwriting the log file we wish to access. RC6 boots fine to Firepro with logitech mouse working.
ace
