Re: Kernel 5.0
Posted: Thu Jan 10, 2019 6:18 pm
Hi Skateman,
Many thanks for testing the RC1-2!
Cheers,
Christian
Many thanks for testing the RC1-2!
Cheers,
Christian
Support Forum
https://forum.hyperion-entertainment.com/
https://forum.hyperion-entertainment.com/viewtopic.php?f=58&t=4181
Code: Select all
git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
Code: Select all
git checkout 891dcc1072f1fa27a83da920d88daff6ca08fc02
Code: Select all
Note: checking out '891dcc1072f1fa27a83da920d88daff6ca08fc02'.
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:
git checkout -b <new-branch-name>
HEAD is now at 891dcc1... powerpc/dma: remove dma_nommu_dma_supported
Results: PASEMI onboard ethernet works and the X5000 (P5020 board) boots. I also successfully tested sound, hardware 3D acceleration, Bluetooth, network, booting with a label etc. The uImages work also in a virtual e5500 quad-core QEMU machine.xeno74 wrote:Next step: 891dcc1072f1fa27a83da920d88daff6ca08fc02 (powerpc/dma: remove dma_nommu_dma_supported)
Code: Select all
git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
Output:Code: Select all
git checkout 891dcc1072f1fa27a83da920d88daff6ca08fc02
Link to the Git: powerpc-dma.6Code: Select all
Note: checking out '891dcc1072f1fa27a83da920d88daff6ca08fc02'. You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b <new-branch-name> HEAD is now at 891dcc1... powerpc/dma: remove dma_nommu_dma_supported
Code: Select all
git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
Code: Select all
git checkout 4558b6e1ddf3dcf5a86d6a5d16c2ac1600c7df39
Code: Select all
You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.
If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:
git checkout -b <new-branch-name>
HEAD is now at 4558b6e... swiotlb: remove swiotlb_dma_supported
Hi Ace,acefnq wrote:Christian
Kernel 5 both iterations up and running well.
Thanks
ace
Hi Ace,acefnq wrote:Chrisrian
Sorry away from my x5000 on vacation. Yes tested both RC1 candidates. Only the version without DRM would boot to my Firepro. Ill lodge the issue on tge site you gave me upon my return in acouple of days.
Ace
Does this mean that the onboard ethernet on the X5000 now works?xeno74 wrote: Results: PASEMI onboard ethernet works and the X5000 (P5020 board) boots. I also successfully tested sound, hardware 3D acceleration, Bluetooth, network, booting with a label etc. The uImages work also in a virtual e5500 quad-core QEMU machine.
Unfortunately it doesn't work. The PASEMI onboard ethernet is from the Nemo board.JohnFante wrote:Does this mean that the onboard ethernet on the X5000 now works?xeno74 wrote: Results: PASEMI onboard ethernet works and the X5000 (P5020 board) boots. I also successfully tested sound, hardware 3D acceleration, Bluetooth, network, booting with a label etc. The uImages work also in a virtual e5500 quad-core QEMU machine.
I read it like that but I can not get it to run on my system. I could be reading it wrong
It case it is so how do I enable it i Fienix?
Thank you!
Results: PASEMI onboard ethernet (X1000) works and the X5000 (P5020 board) boots. I also successfully tested sound, hardware 3D acceleration, Bluetooth, network, booting with a label etc. The uImages work also in a virtual e5500 quad-core QEMU machine.xeno74 wrote:Next step: 4558b6e1ddf3dcf5a86d6a5d16c2ac1600c7df39 (swiotlb: remove swiotlb_dma_supported)
Code: Select all
git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a
Output:Code: Select all
git checkout 4558b6e1ddf3dcf5a86d6a5d16c2ac1600c7df39
Link to the Git: powerpc-dma.6Code: Select all
You are in 'detached HEAD' state. You can look around, make experimental changes and commit them, and you can discard any commits you make in this state without impacting any branches by performing another checkout. If you want to create a new branch to retain commits you create, you may do so (now or later) by using -b with the checkout command again. Example: git checkout -b <new-branch-name> HEAD is now at 4558b6e... swiotlb: remove swiotlb_dma_supported