Kernel 5.0
Re: Kernel 5.0
Christian
RC3 up and running fine booting to SI card with both cards in. Of course we can still not use compiz but I noticed Compton wouldn't work either (probably because of SI card) so I use Macro software for composting. Latest ArticFox also working great.
Thanks for your continued work.
ace
RC3 up and running fine booting to SI card with both cards in. Of course we can still not use compiz but I noticed Compton wouldn't work either (probably because of SI card) so I use Macro software for composting. Latest ArticFox also working great.
Thanks for your continued work.
ace
Re: Kernel 5.0
Thanks a lot for testing!acefnq wrote:Christian
RC3 up and running fine booting to SI card with both cards in. Of course we can still not use compiz but I noticed Compton wouldn't work either (probably because of SI card) so I use Macro software for composting. Latest ArticFox also working great.
Thanks for your continued work.
ace
— Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.0
Hi Ace,acefnq wrote:Will do tomorrow. I lodged the details on the bug site today.
ace
Have you already reported the issue on the bug site yet?
Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.0
Hi All,xeno74 wrote:FYI:
Christoph Hellwig wrote: Interesting. This suggest it is related to the use of ZONE_DMA by
the FSL SOCs that your board uses. Let me investigate this a bit more.
As a hack to check that theory I've pushed a new commit to the
powerpc-dma.6-debug branch to use old powerpc GFP_DMA selection
with the new dma direct code:
http://git.infradead.org/users/hch/misc ... d85f403f06
And another one that drops the addressability checks that powerpc
never had:
http://git.infradead.org/users/hch/misc ... a13ac3b669
Can you first test with both patches, and then just with the first
in case that worked?
I tested Christoph's latest DMA patches today. I successfully compiled kernels for the X5000 and X1000 from his Git 'powerpc-dma.6-debug' (both patches).
X5000: The kernel detects the SATA hard disk drive and boots without any problems.
X1000: The kernel boots and the P.A. Semi Ethernet works!
I will test just the first patch tomorrow.
Link to the test thread: use generic DMA mapping code in powerpc V4
Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.0
Next step just with the first patch: 5c532d07c2f3c3972104de505d06b8d85f403f06 (use powerpc zone selection)
Link to the Git: powerpc-dma.6-debug
Results:
X5000: The kernel detects the SATA hard disk drive and boots without any problems.
X1000: The kernel boots and the P.A. Semi Ethernet works!
Code: Select all
git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6-debug a
Code: Select all
git checkout 5c532d07c2f3c3972104de505d06b8d85f403f06
Results:
X5000: The kernel detects the SATA hard disk drive and boots without any problems.
X1000: The kernel boots and the P.A. Semi Ethernet works!
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.0
Hi Ace,
Have you already reported the issue on the bug site yet?
Cheers,
Christian[/quote]
Sure did a while back and sent all of my output reports.
ace
Have you already reported the issue on the bug site yet?
Cheers,
Christian[/quote]
Sure did a while back and sent all of my output reports.
ace
Re: Kernel 5.0
Many thanks!!!!!acefnq wrote: Sure did a while back and sent all of my output reports.
ace
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.0
Hi All,
I released the RC4 of kernel 5.0 today.
New:
Please test it.
Thanks,
Christian
I released the RC4 of kernel 5.0 today.
New:
- DRM fixes
- Linux 5.0-rc4 Kernel Released - "Everything Looks Ok" -- phoronix.com
- Linus Torvalds' RC4 message
- Linux Git log
- Phoronix articles, reviews and news stories covering Linux 5.0
Please test it.
Thanks,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.0
Hi All,
Christoph has created another branch for testing.
Gitweb: powerpc-dma.6-debug.2
Cheers,
Christian
Christoph has created another branch for testing.
Gitweb: powerpc-dma.6-debug.2
Code: Select all
git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6-debug.2 a
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
http://www.supertuxkart-amiga.de
Running Linux on AmigaONEs can require some tinkering.
Re: Kernel 5.0
Kernel 5.0 RC4 is all fine on the AmigaOne X5000
Big picture: http://www.skateman.nl/wp-content/uploa ... 212005.png
Big picture: http://www.skateman.nl/wp-content/uploa ... 212005.png
AmigaOne X5000 -> 2GHz / 16GB RAM / Radeon RX 570 / Radeon X1950 / M-Audio 5.1 -> AmigaOS / Linux
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full
Amiga 1200 -> Recapped / 68ec020 ACA 1221ec / CF HDD / RetroNET connected to the world
Vampire 4SA - RPi4 Running AmiKitXE Full