Kernel 5.0

AmigaOne X5000 platform specific issues related to Linux only.
User avatar
xeno74
Posts: 9350
Joined: Fri Mar 23, 2012 7:58 am

Re: Kernel 5.0

Post by xeno74 »

Hi Skateman,

Many thanks for testing the RC1-2! :-)

Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
Posts: 9350
Joined: Fri Mar 23, 2012 7:58 am

Re: Kernel 5.0

Post by xeno74 »

Next step: 891dcc1072f1fa27a83da920d88daff6ca08fc02 (powerpc/dma: remove dma_nommu_dma_supported)

Code: Select all

git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a

Code: Select all

git checkout 891dcc1072f1fa27a83da920d88daff6ca08fc02
Output:

Code: Select all

Note: checking out '891dcc1072f1fa27a83da920d88daff6ca08fc02'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

  git checkout -b <new-branch-name>

HEAD is now at 891dcc1... powerpc/dma: remove dma_nommu_dma_supported
Link to the Git: powerpc-dma.6
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
Posts: 9350
Joined: Fri Mar 23, 2012 7:58 am

Re: Kernel 5.0

Post by xeno74 »

xeno74 wrote:Next step: 891dcc1072f1fa27a83da920d88daff6ca08fc02 (powerpc/dma: remove dma_nommu_dma_supported)

Code: Select all

git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a

Code: Select all

git checkout 891dcc1072f1fa27a83da920d88daff6ca08fc02
Output:

Code: Select all

Note: checking out '891dcc1072f1fa27a83da920d88daff6ca08fc02'.

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

  git checkout -b <new-branch-name>

HEAD is now at 891dcc1... powerpc/dma: remove dma_nommu_dma_supported
Link to the Git: powerpc-dma.6
Results: PASEMI onboard ethernet works and the X5000 (P5020 board) boots. I also successfully tested sound, hardware 3D acceleration, Bluetooth, network, booting with a label etc. The uImages work also in a virtual e5500 quad-core QEMU machine.

I released these kernels with Christoph's third DMA patches for testing today.

Download: vmlinux-5.0-rc1-3-AmigaOne_X1000_X5000.tar.gz

Image
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
Posts: 9350
Joined: Fri Mar 23, 2012 7:58 am

Re: Kernel 5.0

Post by xeno74 »

Next step: 4558b6e1ddf3dcf5a86d6a5d16c2ac1600c7df39 (swiotlb: remove swiotlb_dma_supported)

Code: Select all

git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a

Code: Select all

git checkout 4558b6e1ddf3dcf5a86d6a5d16c2ac1600c7df39
Output:

Code: Select all

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

  git checkout -b <new-branch-name>

HEAD is now at 4558b6e... swiotlb: remove swiotlb_dma_supported
Link to the Git: powerpc-dma.6
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
Posts: 9350
Joined: Fri Mar 23, 2012 7:58 am

Re: Kernel 5.0

Post by xeno74 »

acefnq wrote:Christian
Kernel 5 both iterations up and running well.

Thanks

ace
Hi Ace,

You have posted: "both iterations up and running well". Did you test both kernels? Do both RC1 kernels work with the two graphics card?

Thanks for testing!

Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
acefnq
Posts: 236
Joined: Fri Sep 09, 2011 9:58 am

Re: Kernel 5.0

Post by acefnq »

Chrisrian
Sorry away from my x5000 on vacation. Yes tested both RC1 candidates. Only the version without DRM would boot to my Firepro. Ill lodge the issue on tge site you gave me upon my return in acouple of days.

Ace
User avatar
xeno74
Posts: 9350
Joined: Fri Mar 23, 2012 7:58 am

Re: Kernel 5.0

Post by xeno74 »

acefnq wrote:Chrisrian
Sorry away from my x5000 on vacation. Yes tested both RC1 candidates. Only the version without DRM would boot to my Firepro. Ill lodge the issue on tge site you gave me upon my return in acouple of days.

Ace
Hi Ace,

Thanks a lot for reporting! :-)

I will compile the kernels without the DRM patches as long as possible.

Cheers,
Christian
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
JohnFante
Beta Tester
Beta Tester
Posts: 183
Joined: Tue Sep 04, 2012 6:48 am
Location: Copenhagen, Denmark

Re: Kernel 5.0

Post by JohnFante »

xeno74 wrote: Results: PASEMI onboard ethernet works and the X5000 (P5020 board) boots. I also successfully tested sound, hardware 3D acceleration, Bluetooth, network, booting with a label etc. The uImages work also in a virtual e5500 quad-core QEMU machine.
Does this mean that the onboard ethernet on the X5000 now works?

I read it like that but I can not get it to run on my system. I could be reading it wrong :-)

It case it is so how do I enable it i Fienix?

Thank you!
X5000 :-)
User avatar
xeno74
Posts: 9350
Joined: Fri Mar 23, 2012 7:58 am

Re: Kernel 5.0

Post by xeno74 »

JohnFante wrote:
xeno74 wrote: Results: PASEMI onboard ethernet works and the X5000 (P5020 board) boots. I also successfully tested sound, hardware 3D acceleration, Bluetooth, network, booting with a label etc. The uImages work also in a virtual e5500 quad-core QEMU machine.
Does this mean that the onboard ethernet on the X5000 now works?

I read it like that but I can not get it to run on my system. I could be reading it wrong :-)

It case it is so how do I enable it i Fienix?

Thank you!
Unfortunately it doesn't work. The PASEMI onboard ethernet is from the Nemo board.
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
User avatar
xeno74
Posts: 9350
Joined: Fri Mar 23, 2012 7:58 am

Re: Kernel 5.0

Post by xeno74 »

xeno74 wrote:Next step: 4558b6e1ddf3dcf5a86d6a5d16c2ac1600c7df39 (swiotlb: remove swiotlb_dma_supported)

Code: Select all

git clone git://git.infradead.org/users/hch/misc.git -b powerpc-dma.6 a

Code: Select all

git checkout 4558b6e1ddf3dcf5a86d6a5d16c2ac1600c7df39
Output:

Code: Select all

You are in 'detached HEAD' state. You can look around, make experimental
changes and commit them, and you can discard any commits you make in this
state without impacting any branches by performing another checkout.

If you want to create a new branch to retain commits you create, you may
do so (now or later) by using -b with the checkout command again. Example:

  git checkout -b <new-branch-name>

HEAD is now at 4558b6e... swiotlb: remove swiotlb_dma_supported
Link to the Git: powerpc-dma.6
Results: PASEMI onboard ethernet (X1000) works and the X5000 (P5020 board) boots. I also successfully tested sound, hardware 3D acceleration, Bluetooth, network, booting with a label etc. The uImages work also in a virtual e5500 quad-core QEMU machine.

I released these kernels with Christoph's fourth DMA commit for testing today.

Download: vmlinux-5.0-rc1-4-AmigaOne_X1000_X5000.tar.gz

Image
http://www.amigalinux.org
http://www.supertuxkart-amiga.de

Running Linux on AmigaONEs can require some tinkering.
Post Reply