Page 1 of 2

Pegasos2 with Radeon 9800 Mac bios

Posted: Tue Jan 24, 2012 1:27 pm
by Benny
Hello,

Does the Radeon 9800 pro 128M DDR with a MAC-bios work in a Pegasos2 with OS4.1 ?

Re: Pegasos2 with Radeon 9800 Mac bios

Posted: Tue Jan 24, 2012 2:13 pm
by Tuxedo
dunno, but also if works, you cant use 3D with its since no 3D drivers was availabel for taht card unfortunately :(

Re: Pegasos2 with Radeon 9800 Mac bios

Posted: Tue Jan 24, 2012 6:17 pm
by Benny
Tuxedo wrote:dunno, but also if works, you cant use 3D with its since no 3D drivers was availabel for taht card unfortunately :(
The 9800 is much faster in 2D, there is it meant to be for.

Re: Pegasos2 with Radeon 9800 Mac bios

Posted: Tue Jan 24, 2012 7:35 pm
by Tuxedo
yes, but...
Without 3D support you cant use belnder, games, bankers....
I think a 2D card without 3D was useless...

I get a Radeon9000pro and was really better than "standard" 9250 in 2D and also 3D on my Peg2...if you have a radeon92x0 try to use Radeon9000pro firstly...

Re: Pegasos2 with Radeon 9800 Mac bios

Posted: Tue Jan 24, 2012 8:37 pm
by ssolie
We only support normal x86 BIOS and there are no plans to change that.

Re: Pegasos2 with Radeon 9800 Mac bios

Posted: Wed Jan 25, 2012 11:51 am
by Benny
ssolie wrote:We only support normal x86 BIOS and there are no plans to change that.
Well, I'll pass this one then!

Re: Pegasos2 with Radeon 9800 Mac bios

Posted: Wed Jan 25, 2012 11:52 am
by Benny
Tuxedo wrote:yes, but...
Without 3D support you cant use belnder, games, bankers....
I think a 2D card without 3D was useless...

I get a Radeon9000pro and was really better than "standard" 9250 in 2D and also 3D on my Peg2...if you have a radeon92x0 try to use Radeon9000pro firstly...
Thank you, the 8500LE is also one of the fastest, but hard to get.

Re: Pegasos2 with Radeon 9800 Mac bios

Posted: Thu Jan 26, 2012 7:46 pm
by Tuxedo
also 8500 series wasnt supported on AmigaOS4.1 unfortunately...
The fastest supported AGP card avaialbe on Pegasos2 was(as sayd above) the Radeon9000pro card, nothing more nothing less...
Every other theorically supported card that was faster than 9000pro like the 9100 wasnt supported under AmigaOS4.1 unfortunately...

Re: Pegasos2 with Radeon 9800 Mac bios

Posted: Sat Feb 18, 2012 9:05 pm
by Benny
Tuxedo wrote:yes, but...
Without 3D support you cant use belnder, games, bankers....
I think a 2D card without 3D was useless...

I get a Radeon9000pro and was really better than "standard" 9250 in 2D and also 3D on my Peg2...if you have a radeon92x0 try to use Radeon9000pro firstly...
Well today I finally got my Radeon 9000 Pro with 128MB videoram, DVI and VGA outputs.
I copied the devs/monitors/radeon 9250 monitorfile to a new Radeon 9000 monitorfile, and changed the board-tooltype to 9000, after that the system booted with the 9000 card recognized in Workbench.

Is this way recommended ?

The OS-functions from the GfxBench2D benchmark are now aprox. 1.7 as fast.

http://hdrlab.org.nz/benchmark/gfxbench ... result/553
http://hdrlab.org.nz/benchmark/gfxbench ... result/627

Re: Pegasos2 with Radeon 9800 Mac bios

Posted: Sat Feb 18, 2012 10:36 pm
by Spectre660
Another way that should work with all compatible Radeon cards

Change the Monitor file name to Radeon
set tooltype BOARDTYPE=Radeon
Set tooltype CMPLENGTH=6