sii3112, booting from port 0 and 1

A forum for AmigaOne XE and MicroA1-C specific issues.
Post Reply
mlehto
Posts: 55
Joined: Thu Jun 23, 2011 12:39 pm

sii3112, booting from port 0 and 1

Post by mlehto »

I can boot from sata port 0 cd/dvd or hd. It seems, that I cant boot from port 1, hd nor cd/dvd.

Is it impossible or just userfailure?

System is os4.1 a1g3-se

And yes, my battery is fine, thank you :-P
satiropan
Posts: 72
Joined: Wed Jun 20, 2012 2:07 pm
Location: milano, Italia
Contact:

Re: sii3112, booting from port 0 and 1

Post by satiropan »

almost same problem on my a1g3se
hd on sii3112 sata port 0
dvdrw on sii3112 sata port 1
no problem in booting with hd
but won't boot from aos4.1 cdrom
seems uboot fails to recognize the dvdrw sata drive (sort of, has no time to recognize the drive)
no problem in booting from cd if I use pata dvdrw connected as master to internal ide primary
Satiropan
PPA1200 (Poor Portable Amiga 1200): BPPC-160MB,
BVision-CGX4, HD 10GB, slim DVD R/W, Asus VW161D
display, 3COM Lan PC card, OS4.1FE
AmigaOne G3-SE 600MHz, 1GB, Radeon 9200 128DDR,
CS4281 sound card, RTL8029, SiI3114, OS 4.1.6 & OS4.1FE
http://www.oldfab.webs.com
satiropan
Posts: 72
Joined: Wed Jun 20, 2012 2:07 pm
Location: milano, Italia
Contact:

Re: sii3112, booting from port 0 and 1

Post by satiropan »

satiropan wrote:almost same problem on my a1g3se
hd on sii3112 sata port 0
dvdrw on sii3112 sata port 1
no problem in booting with hd
but won't boot from aos4.1 cdrom
seems uboot fails to recognize the dvdrw sata drive (sort of, has no time to recognize the drive)
no problem in booting from cd if I use pata dvdrw connected as master to internal ide primary
solved using a sii3114, hd on port 0, dvd on port 3
Satiropan
PPA1200 (Poor Portable Amiga 1200): BPPC-160MB,
BVision-CGX4, HD 10GB, slim DVD R/W, Asus VW161D
display, 3COM Lan PC card, OS4.1FE
AmigaOne G3-SE 600MHz, 1GB, Radeon 9200 128DDR,
CS4281 sound card, RTL8029, SiI3114, OS 4.1.6 & OS4.1FE
http://www.oldfab.webs.com
Post Reply