Hyperion Entertainment Message Boards

Posted: **Mon Dec 26, 2016 1:02 pm**

@tonyw: It says Smartfilesystem 1.279 (68k) so it is running.

@thomasrapp: Here is the result of the HDDReport Tool:

--------------------------------------------------------------------------------
Report generated by HDDReport version 1.14 on Måndag, 26-Dec-16 at 06:37:39
--------------------------------------------------------------------------------

Overview:

Drive Volume Capacity Type Boot Device Unit Loc. Check
IDF0 880 KB DOS0 0 diskimage 0
IDF1 880 KB DOS0 0 diskimage 1
ICD0 686 MB CD01 2 diskimage 4
ICD1 686 MB CD01 2 diskimage 5
DH0 System 5126 MB DOS7 0< p5020sata 0 >4G ok
USB0 UBBES6 15 GB FAT2 0 usbdisk 0 >4G

System information:

exec.library 53.89
dos.library 53.158 expansion.library 53.1
icon.library 53.16 graphics.library 54.226
intuition.library 54.26 utility.library 54.1

Memory:

Name Address Size Used Free Attributes
chip memory 0x6F33E050 2048 KB 0 Bytes 2048 KB CHIP

--------------------------------------------------------------------------------
Report generated by HDDReport version 1.14 on Måndag, 26-Dec-16 at 06:37:39
--------------------------------------------------------------------------------

File Systems:

DOS type Name Version Features
CD01 0x43443031 CDFileSystem 53.4 (Resource)
DOS0 0x444F5300 FastFileSystem 53.2 (Resource) NSD
DOS7 0x444F5307 FastFileSystem 53.2 (Resource) NSD
FAT2 0x46415432 CrossDOSFileSystem 53.11 (DOS list) TD64, NSD

--------------------------------------------------------------------------------
Report generated by HDDReport version 1.14 on Måndag, 26-Dec-16 at 06:37:39
--------------------------------------------------------------------------------

Exec Devices:

ahi.device Version 6.6 (not a disk)
console.device Version 53.99 (not a disk)
ehci.usbhcd Version 53.24 (not a disk)
input.device Version 53.5 (not a disk)
keyboard.device Version 53.12 (not a disk)
ohci.usbhcd Version 53.21 (not a disk)
ramdrive.device Version 52.6 (no units)
rtl8139.device Version 53.5 (not a disk)
timer.device Version 53.2 (not a disk)
uhci.usbhcd Version 53.13 (not a disk)
usbsys.device Version 53.14 (not a disk)

diskimage.device Unit 0 Version 53.3 (none)

Geometry:
SectorSize : 512
TotalSectors : 0
Cylinders : 0
CylSectors : 1
Heads : 1
TrackSectors : 1
BufMemType : SHARED
DeviceType : Direct Access
Flags : REMOVABLE
Capacity : 0 KB

diskimage.device Unit 1 Version 53.3 (none)

Geometry:
SectorSize : 512
TotalSectors : 0
Cylinders : 0
CylSectors : 1
Heads : 1
TrackSectors : 1
BufMemType : SHARED
DeviceType : Direct Access
Flags : REMOVABLE
Capacity : 0 KB

diskimage.device Unit 4 Version 53.3 (none)

Geometry:
SectorSize : 512
TotalSectors : 0
Cylinders : 0
CylSectors : 1
Heads : 1
TrackSectors : 1
BufMemType : SHARED
DeviceType : CD-ROM
Flags : REMOVABLE
Capacity : 0 KB

diskimage.device Unit 5 Version 53.3 (none)

Geometry:
SectorSize : 512
TotalSectors : 0
Cylinders : 0
CylSectors : 1
Heads : 1
TrackSectors : 1
BufMemType : SHARED
DeviceType : CD-ROM
Flags : REMOVABLE
Capacity : 0 KB

p5020sata.device Unit 0 Version 54.69 NSD

TD_READ64 check failed with error -3 (command not supported by device)
HD_SCSICMD check failed with error -3 (command not supported by device)

SCSI:
Vendor : SAMSUNG
Product : S08EJ10P603359
Revision : ZH10
BlockAddress : 156301488
BlockLength : 512
Capacity : 75 GB

Geometry:
SectorSize : 512
TotalSectors : 156301488
Cylinders : 156301488
CylSectors : 1
Heads : 1
TrackSectors : 1
BufMemType : ANY
DeviceType : Direct Access
Flags : 0
Capacity : 75 GB

RDSK: Flags:
Vendor : SAMSUNG Last = yes
Product : S08EJ10P603359 Last LUN = yes
Revision : ZH10 Last TID = yes
Cylinders : 1250395 Reselect = yes
Sectors : 25 Disk ID = valid
Heads : 5 Controller ID = not valid
CylBlocks : 125 Synch = no
BlockBytes : 512
Capacity : 75 GB

FSHD:
SFS0 l:SmartFilesystem Version 1.279 Size 97984 Bytes

last readable block using CMD_READ: 8388607 (4096 MB)
last readable block using NSCMD_TD_READ64: 156301487 ( 75 GB)

usbdisk.device Unit 0 Version 53.83 (none)

Geometry:
SectorSize : 512
TotalSectors : 30965760
Cylinders : 30965760
CylSectors : 1
Heads : 1
TrackSectors : 1
BufMemType : PUBLIC
DeviceType : Direct Access
Flags : REMOVABLE
Capacity : 15 GB

--------------------------------------------------------------------------------
Report generated by HDDReport version 1.14 on Måndag, 26-Dec-16 at 06:37:39
--------------------------------------------------------------------------------

Partitions:

DH0:
Device = p5020sata.device Flags:
Unit = 0 Bootable = yes
Flags = 0 Mount = yes
SectorSize = 512
Surfaces = 5
SectorsPerBlock = 2 /* 1024 bytes */
SectorsPerTrack = 25
Reserved = 2
PreAlloc = 0
Interleave = 0
LowCyl = 17
HighCyl = 84000
Buffers = 600
BufMemType = 1 /* PUBLIC */
MaxTransfer = 0x7FFFFFFF
Mask = 0xFFFFFFFE
BootPri = 0
DosType = 0x444F5307 /* DOS7 */
Baud = 0
Control = 0

DH1:
Device = p5020sata.device Flags:
Unit = 0 Bootable = no
Flags = 0 Mount = yes
SectorSize = 512
Surfaces = 5
SectorsPerBlock = 1 /* 512 bytes */
SectorsPerTrack = 25
Reserved = 2
PreAlloc = 0
Interleave = 0
LowCyl = 84001
HighCyl = 587311
Buffers = 1000
BufMemType = 1 /* PUBLIC */
MaxTransfer = 0x0FFFFFFF
Mask = 0xFFFFFFFE
BootPri = 0
DosType = 0x53465300 /* SFS0 */
Baud = 0
Control = 0

DH2:
Device = p5020sata.device Flags:
Unit = 0 Bootable = no
Flags = 0 Mount = yes
SectorSize = 512
Surfaces = 5
SectorsPerBlock = 1 /* 512 bytes */
SectorsPerTrack = 25
Reserved = 2
PreAlloc = 0
Interleave = 0
LowCyl = 587312
HighCyl = 1224838
Buffers = 1000
BufMemType = 1 /* PUBLIC */
MaxTransfer = 0x0FFFFFFF
Mask = 0xFFFFFFFE
BootPri = 0
DosType = 0x53465300 /* SFS0 */
Baud = 0
Control = 0

DH3:
Device = p5020sata.device Flags:
Unit = 0 Bootable = no
Flags = 0 Mount = yes
SectorSize = 512
Surfaces = 5
SectorsPerBlock = 8 /* 4096 bytes */
SectorsPerTrack = 25
Reserved = 2
PreAlloc = 0
Interleave = 0
LowCyl = 1224839
HighCyl = 1250394
Buffers = 600
BufMemType = 1 /* PUBLIC */
MaxTransfer = 0x7FFFFFFF
Mask = 0xFFFFFFFE
BootPri = 0
DosType = 0x53574150 /* SWAP */
Baud = 0
Control = 0

--------------------------------------------------------------------------------
Report generated by HDDReport version 1.14 on Måndag, 26-Dec-16 at 06:37:39
--------------------------------------------------------------------------------

DOS Devices:

IDF0:
Device = diskimage.device
Unit = 0
Flags = 0
SectorSize = 512
Surfaces = 2
SectorsPerBlock = 1 /* 512 bytes */
SectorsPerTrack = 11
Reserved = 2
PreAlloc = 0
Interleave = 0
LowCyl = 0
HighCyl = 79
Buffers = 5
BufMemType = 1 /* PUBLIC */
MaxTransfer = 0x00200000
Mask = 0x7FFFFFFC
BootPri = 0
DosType = 0x444F5300 /* DOS0 */
Baud = 0
Control = 0

IDF1:
Device = diskimage.device
Unit = 1
Flags = 0
SectorSize = 512
Surfaces = 2
SectorsPerBlock = 1 /* 512 bytes */
SectorsPerTrack = 11
Reserved = 2
PreAlloc = 0
Interleave = 0
LowCyl = 0
HighCyl = 79
Buffers = 5
BufMemType = 1 /* PUBLIC */
MaxTransfer = 0x00200000
Mask = 0x7FFFFFFC
BootPri = 0
DosType = 0x444F5300 /* DOS0 */
Baud = 0
Control = 0

ICD0:
Device = diskimage.device
Unit = 4
Flags = 0
SectorSize = 2048
Surfaces = 1
SectorsPerBlock = 1 /* 2048 bytes */
SectorsPerTrack = 351000
Reserved = 0
PreAlloc = 0
Interleave = 0
LowCyl = 0
HighCyl = 0
Buffers = 64
BufMemType = 1 /* PUBLIC */
MaxTransfer = 0x01000000
Mask = 0x7FFFFFFE
BootPri = 2
DosType = 0x43443031 /* CD01 */
Baud = 1200
Control = 0

ICD1:
Device = diskimage.device
Unit = 5
Flags = 0
SectorSize = 2048
Surfaces = 1
SectorsPerBlock = 1 /* 2048 bytes */
SectorsPerTrack = 351000
Reserved = 0
PreAlloc = 0
Interleave = 0
LowCyl = 0
HighCyl = 0
Buffers = 64
BufMemType = 1 /* PUBLIC */
MaxTransfer = 0x01000000
Mask = 0x7FFFFFFE
BootPri = 2
DosType = 0x43443031 /* CD01 */
Baud = 1200
Control = 0

DH0: /* System */
Device = p5020sata.device
Unit = 0
Flags = 0
SectorSize = 512
Surfaces = 5
SectorsPerBlock = 2 /* 1024 bytes */
SectorsPerTrack = 25
Reserved = 2
PreAlloc = 0
Interleave = 0
LowCyl = 17
HighCyl = 84000
Buffers = 600
BufMemType = 1 /* PUBLIC */
MaxTransfer = 0x7FFFFFFF
Mask = 0xFFFFFFFE
BootPri = 0
DosType = 0x444F5307 /* DOS7 */

USB0: /* UBBES6 */
Device = usbdisk.device
Unit = 0
Flags = 0
SectorSize = 512
Surfaces = 1
SectorsPerBlock = 1 /* 512 bytes */
SectorsPerTrack = 1
Reserved = 2
PreAlloc = 0
Interleave = 0
LowCyl = 8064
HighCyl = 30965759
Buffers = 200
BufMemType = 1 /* PUBLIC */
MaxTransfer = 0x7FFFFFFF
Mask = 0xFFFFFFFE
BootPri = 0
DosType = 0x46415432 /* FAT2 */
Baud = 1200
Control = "NOACCESSDATE"

--------------------------------------------------------------------------------
End of report
--------------------------------------------------------------------------------

Many of my postings here seem to be rather big.

The system time was off when I did this report. I was not up doing this before 7 in the morning. I have corrected the time setting now.

Posted: **Mon Dec 26, 2016 8:33 pm**

Niolator wrote:@tonyw: It says Smartfilesystem 1.279 (68k) so it is running.

Strange. It's nowhere else to be seen. Are you sure that your current directory wasn't L: when you entered the version command?

@thomasrapp: Here is the result of the HDDReport Tool:

Looks like everything is in place with the correct identifiers etc. But for some reason SmartFilesSystem didn't make it into Filesystem.resource. Did you reboot after you added it to the RDB?

Maybe p5020sata.device does not load 68k file systems from the RDB. Could be a bug. Or intention.

Anyhow, you can cut the mount data from the Partitions section of the report and create DosDriver files for the partitions. Just add FileSystem = L:SmartFileSystem and Activate = 1 like so:

Code: Select all

    Device          = p5020sata.device
    Unit            = 0
    Flags           = 0
    SectorSize      = 512
    Surfaces        = 5
    SectorsPerBlock = 1
    SectorsPerTrack = 25
    Reserved        = 2
    PreAlloc        = 0
    Interleave      = 0
    LowCyl          = 84001
    HighCyl         = 587311
    Buffers         = 1000
    BufMemType      = 1
    MaxTransfer     = 0x0FFFFFFF
    Mask            = 0xFFFFFFFE
    BootPri         = 0
    DosType         = 0x53465300
    FileSystem      = L:SmartFileSystem
    Activate        = 1

Save this as Sys:Storage/DosDrivers/DH1, then enter Mount DH1: at a DOS prompt.

Many of my postings here seem to be rather big.

When I wrote "attach it here" I actually meant to use the "Upload attachment" function of the forum.

Posted: **Mon Dec 26, 2016 10:31 pm**

Maybe p5020sata.device does not load 68k file systems from the RDB.

I don't think any device driver does that. I'm sure the PATA/SATA drivers do not. I think that would be up to mounter.library.

Posted: **Tue Dec 27, 2016 12:16 am**

thomasrapp wrote: When I wrote "attach it here" I actually meant to use the "Upload attachment" function of the forum.

Sorry about that. I am not really used to this forum yet.

I will continue trying tomorrow it is rather late now.

Posted: **Tue Dec 27, 2016 11:41 am**

@thomasrapp: I am at dh0: when I type "version full Smartfilesystem" and the information shows up fine.

I have now created the file with the mount data and placed it in L: The only thing that happens when I try to mount DH1: is that I get the message the file DEVS:Mountlist is missing. Maybe I am making a very basic mistake but I very seldom mess with mountlists and such.

Posted: **Tue Dec 27, 2016 12:56 pm**

Niolator wrote:placed it in L:

thomasrapp wrote:Save this as Sys:Storage/DosDrivers/DH1

You see the discrepancy?

tonyw wrote:I don't think any device driver does that. I'm sure the PATA/SATA drivers do not. I think that would be up to mounter.library.

It's the task of the device driver to initiate the process. Whether it utilises an external library or does it by itself does not really matter in the end.

Posted: **Tue Dec 27, 2016 2:43 pm**

@thomasrapp: oops.

I don't know where I got L: from but I read the post several times. I'll report any progress later when I come home.

Posted: **Tue Dec 27, 2016 3:39 pm**

Well, that didn't work either. As I thought it seems that the OS hinders attempts to use old 68k SFS filesystems. I get a message (direct translated from Swedish):

A process attempted to get access with an obsolete method. There is no longer support for BCPL-programs

Unit: "DH1/SmartFilesysem 1.279 "
GlobVec == 0
Process "Shell Process"
Function: "Internal_LoadDevice()"

This message is shown when the program has used a system function in a way that violates normal guidelines for the OS. It is uncertain if the program will work as intended.

DH1 is mounted but I can't access it. If I try I only get this message again.

Posted: **Tue Dec 27, 2016 5:08 pm**

Sorry, my fault. Add this to the DosDriver:

GlobVec = -1

Posted: **Tue Dec 27, 2016 10:08 pm**

@thomarapp: Now it works. Thanks for all your help.

Hyperion Entertainment Message Boards

Smartfilesystem v 1.293 ?

Re: Smartfilesystem v 1.293 ?

Re: Smartfilesystem v 1.293 ?

Re: Smartfilesystem v 1.293 ?

Re: Smartfilesystem v 1.293 ?

Re: Smartfilesystem v 1.293 ?

Re: Smartfilesystem v 1.293 ?

Re: Smartfilesystem v 1.293 ?

Re: Smartfilesystem v 1.293 ?

Re: Smartfilesystem v 1.293 ?

Re: Smartfilesystem v 1.293 ?