My Amiga is connected to a cable with a standard router, base internet connection is on my second Windows XP PC (as always)
I go into the Internet setup and i set on "Interface":
Name: The name of my connection
Gesture: ppc440ep_eth.device
Unit: 0
Type: Ethernet
But i can be able to connect using Update 3
But the reason why i open this thread isn't this:
As it doesn't work i try modify the connection prefs setting "Unit 1" instead (i didn't sure in witch port the cable was plugged) but after a while I get a RoadShow Prefs crash and then a Recoverable Alert (witch i can't be able to skip manually using the mouse because USB mouse are not supported on Sam when such Recoverable alert happen !)
Here the crash:
AFAIK I never seen such issue with the Update 2, anyone with similar problems ?Crash log for task "ROADSHOW_PREFS"
Generated by GrimReaper 53.2
Crash occured in module ISO-8859-15.charset at address 0x6FF641EC
Type of crash: DSI (Data Storage Interrupt) exception
Register dump:
GPR (General Purpose Registers):
0: 0003FFF3 55716BB0 00000000 58CD9A20 00000008 5444BFD8 FFFFFFFF 00000000
8: 58D30288 58D30000 56D75CA0 5FFB5CCC 44424022 00000000 53920000 8003000E
16: 53F673B0 53920000 53920000 00000008 00000001 53920000 53927020 53920000
24: 00000000 FFFFFFFF 56D7CBA8 53927020 14FA21E0 53920000 5444BFD8 00000008
FPR (Floating Point Registers, NaN = Not a Number):
0: nan 1218 673 34
4: 0 51.8 0.8 288
8: 201 2.78132e-309 594.8 255
12: 1 674 0 -5.05923e-321
16: 1.32625e-315 0 0 0
20: 0 0 0 8.88967e+20
24: 4.94066e-324 0 0 -1.20437e+36
28: 0 1.35808e-312 8.8275e-311 1.78006e-307
FPSCR (Floating Point Status and Control Register): 0x82004000
SPRs (Special Purpose Registers):
Machine State (msr) : 0x0002F030
Condition (cr) : 0x84424028
Instruction Pointer (ip) : 0x6FF641EC
Xtended Exception (xer) : 0x20000007
Count (ctr) : 0xFFFFFFFF
Link (lr) : 0x6FFF69F8
DSI Status (dsisr) : 0x00000000
Data Address (dar) : 0x00000008
680x0 emulated registers:
DATA: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
ADDR: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
FPU0: 0 0 0 0
FPU4: 0 0 0 0
Symbol info:
Instruction pointer 0x6FF641EC belongs to module "ISO-8859-15.charset" (HUNK/Kickstart)
Stack trace:
module LOCALE:CharSets/ISO-8859-15.charset at 0x6FF641EC (section 4 @ 0x1CC)
module LIBS:locale.library at 0x6FFFC828 (section 5 @ 0xA808)
module Internet at 0x6FD4C3DC (section 5 @ 0xF3BC)
module Internet at 0x6FD4EEBC (section 5 @ 0x11E9C)
module Internet at 0x6FD4388C (section 5 @ 0x686C)
Internet:_start()+0x54 (section 1 @ 0x69c0)
native kernel module dos.library.kmod+0x00020a14
native kernel module kernel+0x0003af4c
native kernel module kernel+0x0003afcc
PPC disassembly:
6ff641e4: 39090188 addi r8,r9,392
6ff641e8: 7cc903a6 mtctr r6
*6ff641ec: 88040000 lbz r0,0(r4)
6ff641f0: 38840001 addi r4,r4,1
6ff641f4: 89250000 lbz r9,0(r5)
System information:
CPU
Model: AMCC PPC440EP V1.3
CPU speed: 799 MHz
FSB speed: 133 MHz
Extensions:
Machine
Machine name: Sam440EP
Memory: 1048576 KB
Extensions: bus.pci
Now i retry to connect my Sam, crossing finger ...